Artesyn AXP1440, Installation And Use Manual, Page: 90 / 156

AXP1440 Shelf Installation
88 AXP1440 Installation and Use (6806800H23U )
5.3 Installation Prerequisites
This section describes the prerequisites required for installation.
5.3.1 Equipment You Will Need
You need the following to install the AXP1440 14-slot shelf into an approved EIA 23" or 600 mm
x 600 mm ETSI frame:

Torque wrench

Nut driver with 7/16 mm socket

Multimeter

Phillips head screwdriver, #1

Front mounting brackets for an EIA 23" frame (shipped with your AXP1440)

AdvancedTCA PEM Service Kit, PN 6706808A01 (shipped with your AXP1440)

Right-angle Cable Lug Kit, PN 6706808A01 (shipped with your AXP1440)
5.3.2 Rack/Cabinet Cooling Guidelines
It is important to have sufficient open space at the front and rear of the shelf when installed in
a rack or cabinet. Depending on whether the enclosure has solid or vented doors will determine
the recommended open space required. Follow these guidelines for positioning the shelf to
allow for the optimal open space for the shelf air inlet and shelf air exhaust.
Rack Mounting
Per ETSI 600 mm x 600 mm ETSI frame on integrated front frame mounting
ears.
Frame mounting brackets are required for a 23" EIA frame.
Rear mounting brackets are recommended in both instances for Central
Office Environment.
Each shelf requires 13 U of space and effectively takes up 13 U when mounted
in a rack. Three shelves can fit in a 40U telecom rack, which leaves 1U
remaining.
Cable management trays are available for the front and the rear of the shelf.
Table 5-1. AXP1440 14-Slot Shelf Physical Characteristics (continued)
Characteristics Specifications