Artesyn AXP1440, Installation And Use Manual, Page: 104 / 156

AXP1440 Shelf Installation
102 AXP1440 Installation and Use (6806800H23U )
Programming 39703 bytes to Master AVR at 000000 ... 100%
Preparing Slave AVR for programming ... OK
Programming 7008 bytes to Slave AVR at 000000 ... 100%
upgradefw returned 0.
/bin/upgradepem: Upgrade complete.
Verify firmware version:
# clia ipmc -v 0x66
Pigeon Point Shelf Manager Command Line Interpreter
66: Entity: (0xa, 0x60) Maximum FRU device ID: 0x01
PICMG Version 2.1
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause): Normal State Change (0x0)
Device ID: 0x01, Revision: 0, Firmware: 1.03 (ver. 1.0.3),
IPMI ver 1.5
Manufacturer ID: 0000a1, Product ID: 005e, Auxiliary Rev:
00000018
Device ID String: "PEM1620"
Global Initialization: 0xc, Power State Notification:
0xc, Device Capabilities (0x29)
Controller provides Device SDRs
Supported features: 0x29
"Sensor Device" "FRU Inventory Device" "IPMB Event
Generator"
5.12.3 Shelf Manager Firmware Upgrade
There are three files which contain the ShM firmware:
sentry.shmm1500.kernel
,
sentry.shmm1500.rfs
, and
sentry.shmm1500.u-boot.bin
. All files should be
loaded onto both ShMs using the procedures described here. These files also contain firmware
to be loaded into the SAM1500 FPGA. The SAM1500 FPGA will be programmed automatically
(if necessary) by the process.
As upgrades are released, Artesyn will supply the current version of these files.