Artesyn AXP1440, Installation And Use Manual, Page: 111 / 156

FRU Installation
AXP1440 Installation and Use (6806800H23U) 109
6. Slide the RTM into the slot.
7. Apply equal and steady pressure to the RTM to carefully slide the RTM into the shelf
until you feel resistance. Continue to gently push the RTM until the RTM connectors
engage.
8. Squeeze the lever and the latch together and hook the lower and the upper handle into
the shelf rail recesses.
9. Fully insert the RTM and lock it to the shelf by pressing the two components of the
lower and the upper handles together and turning the handles toward the face plate.
If your shelf is powered, as soon as the RTM is connected to the front blade,
the blue LED is illuminated, and will remain illuminated until both the lower
handle of the RTM and the lower handle of the front blade are closed.
10. Close the lower handle of the front blade in order to power up the payload of both the
front blade and the RTM.
The blue LEDs of both the front blade and the RTM start to flash. This
indicates that the front blade is informing the shelf manager about its desire
to power up the payload of both the front blade and the RTM.
11. Tighten both face plate screws on the RTM.
12. Wait until the blue LEDs of both the front blade and the RTM are OFF.
A switched OFF blue LED indicates that the payload of the respective blade or
RTM has been powered up and is active.
13. Plug interface cable into face plate connectors, if applicable.