Artesyn AXP1440, Installation And Use Manual, Page: 69 / 156

Chapter 3
AXP1440 Installation and Use (6806800H23U) 67
Site Preparation
3.1 Overview
The following sections help you to prepare system installation. It provides information on
unpacking and inspecting the system, requirements, technical data, and additional
information you need to know before you begin system installation. At the end of the chapter
there are helpful checklists for preparing your site for the installation.
3.2 Site Planning Considerations
This section provides information to prepare the site and the shelf for installation.
3.2.1 Receiving and Unpacking the System
Carefully inspect the system and all components delivered together with it
Personal Injury
The system is heavy and if you carry it on your own you can hurt your back.
To prevent injury, keep your back straight and have two people lift the system or use
additional lifting equipment.
System Damage
Unstable system installation in a rack can cause the rack to topple over.
Therefore, if your system is the only one in the rack, make sure to mount the system in
the lowest part of the rack. If other systems are installed in one rack, start with the
heaviest component at the bottom.
If the rack is equipped with stabilizing devices, make sure that they are installed and
extended so that the rack is secure. Then proceed to mount or service the system.
Do not tilt the system forward or backward when removing it from the system package
as the FRU ejector handles at the bottom could be damaged.
Use ESD
protection
Damage of Circuits
Electrostatic discharge and incorrect RTM installation and removal can damage circuits
or shorten their life.
Before touching the RTM or electronic components, make sure that you are working in
an ESD-safe environment.