Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 654 / 708

Main TOC

Section TOC

N ext

Supervision

Overview

You’re responsible for supervising those

who ride your ATV. Your wisdom is valu-

able... it’ll bring them all back safely—

your friends, your family, your relatives,

and your ATV. It’s crucial you consider

yourself a supervisor for all riders of your

ATV. Whether you accept responsibility

or not, the truth is you are responsible for

others riding your ATV.

You’re to the last letter in “PASS”...

“Supervision.” You’ve just gone through

the manual, and you’ve seen what’s

involved. That puts you in a good posi-

tion to be confident about what you

know. So now it’s time to use your

knowledge and supervise others who ride

your ATV.

Inexperienced/Untrained

Riders

You can’t let people ride your ATV who

don’t know what they’re doing. Unless

they’ve had over a year of experience

with riding an all-terrain ATV or taken a

training course, it’s your responsibility to

keep them off your ATV. It can be dan-

gerous (especially for under-aged chil-

dren)—all the more reason for you to be

firm.

Experienced/Trained

Riders

If anyone is going to borrow your ATV,

you are responsible for their supervision.

Before they ride, have them take the

training course, have them watch the

safety video, and have them read the

Operator’s Manual. You train them. It

doesn’t matter how you do it, as long as

you do it.

TRV’s are a little different from the han-

dling to the stability to the controls. So

regardless of how much experience your

family members have, they don’t have

experience with

your

ATV. Let experi-

enced riders get familiar with your

ATV—show them the basics before they

take off. You don’t want it on your con-

science that someone got hurt because

you didn’t tell them how to use your

ATV.

Remember that regardless of

experience, you should never let

anyone under the age of 16 oper-

ate your ATV

2411-257

Taking Responsibility

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands