Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 33 / 708

DIVISION

II - OPERA

ION/

MAINTE

NAN

Main Table of Contents

Section Table of Contents

Ne xt

ATV Operation

K-Turns

Use K-turns if you accidentally stall while riding uphill; you need to

take action before the ATV rolls backward down the hill.

1. Stop where you are, apply the brakes.
2. Shut off the engine.
3. Keep your body weight shifted forward.

4. Get off the ATV on the uphill side.
5. If you’re to the left of the ATV, turn the handlebar all the way

left.

6. Partially release the brake, but lightly hold the brake lever.
7. Let the ATV roll to your right side until it faces slightly down-

hill.

8. Reapply the brakes.
9. Get back on the ATV from the uphill side, and keep your weight

shifted uphill when you sit down.

10. Start the engine and follow the method for riding downhill.

Riding Uphill

Roughly 20% of accidents happen while riding on hills and as a result

of the ATV rolling or flipping. So, obviously, use extreme caution and

follow this method for riding uphill.

1. Accelerate before you start climbing; then maintain a steady

pace.

2. Lean as far forward as possible. For steeper hills, come off your

seat to stand and lean forward.

3. If you lose speed, quickly release the throttle (so your front tires

don’t lift),

ATV-0013

ATV-0024

ATV-0025

ATV-0020

ATV-0034

ATV-0035

ATV-0036

ATV-0037

ATV-0019

ATV-0032

ATV-0033

2012 Y-12

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands