manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Share
Download
Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 13

D

IVIS

ION I - 

R

IDE

R  A

W

AR

ENE

S

S

/

RESPONSIBIL

ITY

11

Previous

Main Table of Contents

Section Table of Contents

Next

Warnings

! WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds or removing the speed
limiting device from the ATV.

WHAT CAN HAPPEN

Increases your chances or losing control of the ATV, which can
result in an accident.

HOW TO AVOID THE HAZARD

Always ride at a speed that is proper for the terrain, visibility and
operating conditions, and your age and experience.

! WARNING

POTENTIAL HAZARD

Attempting wheelies, jumps, and
other stunts.

WHAT CAN HAPPEN

Increases the chance of an accident
including an overturn.

HOW TO AVOID THE 

HAZARD

Never attempt stunts, such as wheelies or jumps. Don’t try to
show off.

! WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you use it to make sure the
ATV is in safe operating condition.
Always follow the inspection and maintenance procedures and
schedules described in this Operator’s Manual.

! WARNING

POTENTIAL HAZARD

Failure to use extra care when operat-
ing the ATV on unfamiliar terrain.

WHAT CAN HAPPEN

You can come upon hidden rocks,
bumps, or holes without enough time
to react.
Could result in the ATV overturning or
going out of control.

HOW TO AVOID THE HAZARD

Go slowly and be extra careful when operating on unfamiliar ter-
rain.
Always be alert to changing terrain conditions when operating the
ATV.

2012 Y-12

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands