Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 512 / 708

Main TOC

Section TOC

N ext



NOTE: Take the ATV to an autho-

rized Arctic Cat ATV dealer for this
service.

Protective Rubber

Boots

The protective boots should be inspected

periodically according to the Mainte-

nance Schedule.

Ball Joint Boots (Upper

and Lower/Right and Left)

CC791

1. Secure the ATV on a support stand to

elevate the front wheels.

2. Remove both front wheels.
3. Inspect the four ball joint boots for

cracks, tears, or perforations.

4. Check the ball joint for free-play by

grasping the steering knuckle and

turning it from side to side and up and

down.

5. If boot damage is present or ball joint

free-play seems excessive, contact an

authorized Arctic Cat ATV dealer for

service.

Tie Rod Boots (Inner and

Outer/Right and Left)

CC792

1. Secure the ATV on a support stand to

elevate the front wheels.

2. Remove both front wheels.
3. Inspect the four tie rod boots for

cracks, tears, or perforations.

4. Check the tie rod end free-play by

grasping the tie rod near the end and

attempting to move it up and down.

5. If boot damage is present or tie rod

end free-play seems excessive, con-

tact an authorized Arctic Cat ATV

dealer for service.

Drive Axle Boots

CC793

CF125A

1. Inspect all drive axle boots for cracks,

tears, or perforations.

2. If boot damage is present, contact an

authorized Arctic Cat ATV dealer for

service.

Battery

The battery is located under the seat.
After being in service, batteries require

regular cleaning and recharging in order

to deliver peak performance and maxi-

mum service life. The following proce-

dures are recommended for cleaning and

maintaining lead-acid batteries. Always

read and follow instructions provided

with battery chargers and battery prod-

ucts.

2011 650

2012 650

2011 650

2012 650

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands