manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

37

Divis

ion 

II

 - Opera

tion

/

Ma

inte

nance

Previous

Main TOC

Section TOC

Next

ATV Operation

Crossing Obstacles

Crossing obstacles is risky; avoid it if

possible. Riding over logs, rocks, and

ruts means combining all the active rid-

ing skills into one big motion. Your ATV

will respond differently for different

obstacles (logs, ruts, etc.), but these are

general guidelines for overcoming two-

track (both tires contacting the obstacle at

the same time) obstacles:

ATV-0016

ATV-0026

ATV-0027

1. Keep your speed way down; less

than 5 mph.

2. Approach the obstacle head-on.
3. Come up off the seat.
4. Keep your weight on the footrests.
5. Apply a little throttle when the front

tires make contact with the obstacle.

6. Lean forward and release the throttle

when the front tires clear the obsta-

cle.

7. Keep your body loose to absorb any

shock.

8. If the ATV starts tipping, shift your

weight to keep it in balance.

To clear a single-track (only one tire con-

tacts) obstacle, follow the same rules

except:

1. Use the ATV’s momentum to clear

the obstacle.

2. Don’t pull up on the handlebar.
3. Don’t apply the throttle.

Driving an ATV and a car have some

similarities; however, there are a few sit-

uations that require special attention:

• Reversing
• Skidding or Sliding
• Parking on a Hill
• Stalling on a Hill
• Crossing Water
• Crossing Roads
• Driving in Cold Weather
• Stopping the ATV
• Stopping the Engine

Reversing

It’s tough to see things behind you.

1. Go slowly. It’s hard to see behind

you.

2. Keep your handlebar straight.
3. Backing down hills is a bad idea; do

a U-turn or K-turn instead to turn

around.

Skidding or Sliding

If you lose control after hitting sand, ice,

mud, or water:

1. Turn your handlebar into the direc-

tion of the slide.

2. Keep your hand off the brakes until

you’re out of the skid.

3. Shift your weight forward.

Sometimes your ATV may not respond

and goes straight ahead instead of letting

you turn. Here’s how to handle it:

Tips

2012 350-425

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Yutrax HC1500 Operator'S Manual preview
HC1500
Brand: Yutrax Pages: 10
Panasonic NS1000 Quick Reference Manual preview
NS1000
Brand: Panasonic Pages: 2
Ezgo ST SPORT 2+2 Service Manual preview
ST SPORT 2+2
Brand: Ezgo Pages: 64
Eton DXL90 Owner'S Manual preview
DXL90
Brand: Eton Pages: 30
Humbaur 1000 Series Operating Manual preview
1000 Series
Brand: Humbaur Pages: 200
Valor 12-TU Owner'S Manual preview
12-TU
Brand: Valor Pages: 41
Polaris Magnum 9917518 Owner'S Manual Supplement preview
Magnum 9917518
Brand: Polaris Pages: 1
ODES ODES1000ATV-L Owner'S Manual preview
ODES1000ATV-L
Brand: ODES Pages: 97
Landoll 345C Operator'S Manual preview
345C
Brand: Landoll Pages: 64
Club Car CARRYALL 100 CE Owner'S Manual preview
CARRYALL 100 CE
Brand: Club Car Pages: 68
Ski-Doo 2006 MX X Operator'S Manual preview
2006 MX X
Brand: Ski-Doo Pages: 28
Renegade 3OO ZTR Operator'S Manual preview
3OO ZTR
Brand: Renegade Pages: 19
Yamaha Big Bear YFM350UBL Owner'S Manual preview
Big Bear YFM350UBL
Brand: Yamaha Pages: 170
Clam Corp One Tough Trailer Specification Sheet preview
One Tough Trailer
Brand: Clam Corp Pages: 3
Clam Polar Trailer LG-10 Quick Manual preview
Polar Trailer LG-10
Brand: Clam Pages: 5
Clam Polar Trailer CF-10 Quick Manual preview
Polar Trailer CF-10
Brand: Clam Pages: 4
Clam Polar Trailer 8272 Manual preview
Polar Trailer 8272
Brand: Clam Pages: 5
Clam POLAR TRAILER LG 900 Manual preview
POLAR TRAILER LG 900
Brand: Clam Pages: 8

Brands by name

Popular brands

Load more brands