Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 274 / 708

Main TOC

Section TOC

N ext

Preparation after Storage

Taking the ATV out of storage and cor-

rectly preparing it will assure many miles

and hours of trouble-free riding. Arctic

Cat recommends the following procedure

to prepare the ATV.

1. Clean the ATV thoroughly.
2. Clean the engine. Remove the cloth

from the exhaust system.

3. Check all control wires and cables

for signs of wear or fraying. Replace

if necessary.

4. Change the engine oil.
5. Check the coolant level and add

properly mixed coolant as necessary.

6. Charge the battery; then install. Con-

nect the battery cables making sure

to connect the positive cable first.

7. Check the entire brake systems

(fluid level, pads, etc.), all controls,

headlights, taillight, brakelight, and

headlight aim; adjust or replace if

necessary.

8. Check the tire pressure. Inflate to

recommended pressure as necessary.

9. Tighten all nuts, bolts, cap screws,

and screws making sure all cali-

brated nuts, cap screws, and bolts

are tightened to specifications.

10. Make sure the steering moves freely

and does not bind.

11. Check the spark plug. Clean or

replace as necessary.

12. Follow the recommendations found

in the Starting the Engine sub-sec-

tion in Division I of this manual.

2012 300

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands