manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

46

Previous

Main TOC

Section TOC

Next

Throttle Lever

Control engine RPM with the position of

the throttle lever. Operate this lever with

the thumb. Pushing it forward increases

engine RPM and allowing it to retract

decreases engine RPM.

KM122A

Throttle Limiter Screw

Throttle lever travel may be limited by

adjusting the throttle limiter screw. The

throttle limiter should be adjusted

according to the operator’s skill and

experience. To adjust the throttle limiter,

use the following procedure.

KM125A

1. Loosen the jam nut (1).
2. Turn the throttle limiter screw (2)

clockwise to decrease engine RPM

maximum or counterclockwise to

increase engine RPM maximum.

3. Tighten the jam nut securely.

Fuel Valve

The fuel valve is incorporated in the gas

tank. There are three positions: ON, RES

(reserve), and OFF.

KM146A

In the OFF position, the valve will pre-

vent gasoline flow to the carburetor. In

the ON position (the normal operating

position), gasoline will flow from the

tank to the carburetor. In this position,

4.54 L (1.2 U.S. gal.) will remain in the

tank as a reserve quantity.
Moving the valve to the reserve (RES)

position will allow the operator to use the

remaining gasoline in the tank. When

turning the valve to any of the three posi-

tions, be sure the indicator is pointed

directly at the position desired.

Indicator Lights (Utility)

KM123A

1.

Low Range Indicator

 - A white

light will illuminate when the shift

lever is in the “low range” position.

The light will go out when the lever

is moved to another position.

! WARNING

Leaving the fuel valve in the ON or
RES position when the engine is off
can be hazardous. The carburetor
may overflow and fuel may run into
the engine. This can cause a fire or
cause severe damage to the ATV
when the engine is started. Always
leave the fuel valve in the OFF posi-
tion when the engine is not running.

2012 300

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Landoll 600A Series Operator'S Manual preview
600A Series
Brand: Landoll Pages: 86
Polaris Trail Blazer Owner'S Manual preview
Trail Blazer
Brand: Polaris Pages: 118
E-TON CXL-150 Owner'S Manual preview
CXL-150
Brand: E-TON Pages: 34
Truxta BENDI EB400 Operator'S Manual preview
BENDI EB400
Brand: Truxta Pages: 8
Recon Sport 2007 Owner'S Manual preview
Sport 2007
Brand: Recon Pages: 102
HTI 1437137 Instruction Manual preview
1437137
Brand: HTI Pages: 6
Eagle Golf Car User Manual preview
Golf Car
Brand: Eagle Pages: 12
KTM 2008 450 XC ATV Repair Manual preview
2008 450 XC ATV
Brand: KTM Pages: 223
Hammerhead eXtreme Sport ES150IIR Owner'S Manual preview
eXtreme Sport ES150IIR
Brand: Hammerhead Pages: 67
PARKIT360 TRANSFORMER 15K-B Instruction Manual preview
TRANSFORMER 15K-B
Brand: PARKIT360 Pages: 26
Taylor-Dunn RE-380-36 Operator'S And Service Manual preview
RE-380-36
Brand: Taylor-Dunn Pages: 260
Yamaha RAPTOR YFM700RF 2015 Service Manual preview
RAPTOR YFM700RF 2015
Brand: Yamaha Pages: 394
Yamaha WARRIOR YFM350XNC Owner'S Manual preview
WARRIOR YFM350XNC
Brand: Yamaha Pages: 167
Razor CRAZY CART SHUFFLE Owner'S Manual preview
CRAZY CART SHUFFLE
Brand: Razor Pages: 12
Yamaha GRIZZLY 550 2010 Owner'S Manual preview
GRIZZLY 550 2010
Brand: Yamaha Pages: 172
Vetus MTC125 Installation Manual preview
MTC125
Brand: Vetus Pages: 56
Ontario Drive & Gear Centaur V2001DT Operator'S Manual preview
Centaur V2001DT
Brand: Ontario Drive & Gear Pages: 56
Liangzi Power UTV1000-3 Maintenance Manual preview
UTV1000-3
Brand: Liangzi Power Pages: 184

Brands by name

Popular brands

Load more brands