Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 366

Page: 366 / 708

Main TOC

Section TOC

TREAD LIGHTLY!

ON PUBLIC AND PRIVATE LAND

OFFICIAL

SPONSOR

Foreword

Congratulations and thank you from Arc-

tic Cat Inc. for purchasing an ARCTIC
CAT

700 Diesel. Built with American

engineering and manufacturing know-

how, it is designed to provide superior

ride, comfort, utility, and dependable ser-

vice.
This Operator’s Manual is furnished to

make sure that the operator is aware of

safe operating procedures. It also

includes information about the general

care and maintenance of your ATV.
Carefully read the following pages. If

you have any questions regarding this

ATV, contact an authorized Arctic Cat

ATV dealer for assistance. Remember,

only authorized Arctic Cat ATV dealers

have the knowledge and facilities to pro-

vide you with the best service possible.

• Know all local, state/provincial riding

laws,

• Respect your ATV, and
• Respect the environment, and
• You will gain respect of others.

We also advise you to strictly follow the

recommended maintenance program as

outlined. This preventive maintenance

program is designed to ensure that all

critical components on this ATV are thor-

oughly inspected at various intervals.
All information in this manual is based

on the latest product data and specifica-

tions available at the time of printing.

Arctic Cat Inc. reserves the right to make

product changes and improvements

which may affect illustrations or explana-

tions without notice.

1411-930A

Division II of this manual covers opera-

tor-related maintenance, operating

instructions, and storage instructions. If

major repair or service is ever required,

contact an authorized Arctic Cat ATV

dealer for professional service.
At the time of publication, all informa-

tion and illustrations in Division II were

technically correct. Some illustrations

used in Division II are used for clarity

purposes only and are not designed to

depict actual conditions. Because Arctic

Cat Inc. constantly refines and improves

its products, no retroactive obligation is

incurred.

Protect Your Sport

Parts and Accessories

When in need of replacement parts,

oil, or accessories for your Arctic Cat

TRV, be sure to use only GENUINE

ARCTIC CAT PARTS, OIL, AND

ACCESSORIES. Only genuine Arc-

tic Cat parts, oil, and accessories are

engineered to meet the standards and

requirements of your Arctic Cat TRV.

For a complete list of accessories,

refer to the current Arctic Cat Acces-

sory Catalog.
To aid in service and maintenance pro-

cedures on this ATV, a Service Manual

and an Illustrated Parts Manual are

available through your local Arctic

Cat ATV dealer.

2012 700 Diesel

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands