manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

43

Division

 II - Operation

/

Ma

in

te

na

n

ce

Previous

Main Table of Contents

Section Table of Contents

Next

Previous

Main Table of Contents

Section Table of Contents

Next

NOTE: The sealing strip should NOT be removed and NO

fluid should be added.

3. Be sure the charger and battery are in a well-ventilated area. Be

sure the charger is unplugged from the 110-volt electrical outlet.

4. Connect the red terminal lead from the charger to the positive

terminal of the battery; then connect the black terminal lead of

the charger to the negative terminal of the battery.

NOTE: Optional battery charging adapters are available

from your authorized Arctic Cat dealer to connect directly to
your vehicle from the recommended chargers to simplify the
maintenance charging process. Check with your authorized
Arctic Cat dealer for proper installation of these charging
adapter connectors.

5. Plug the battery charger into

a 110-volt electrical outlet.

6. If using the CTEK Multi US

800, there are no further but-

tons to push. If using the

CTEK Multi US 3300, press

the Mode button (A) at the

left of the charger until the

Maintenance Charge Icon (B)

at the bottom illuminates. The Normal Charge Indicator (C)

should illuminate on the upper portion of the battery charger.

NOTE: The maintainer/charger will charge the battery to

95% capacity at which time the Maintenance Charge Indica-
tor (D) will illuminate and the maintainer/charger will change
to pulse/float maintenance. If the battery falls below 12.9 DC
volts, the charger will automatically start again at the first
step of the charge sequence.

NOTE: Not using a battery charger with the proper float

maintenance will damage the battery if connected over
extended periods.

Charging

NOTE: Arctic Cat recommends the use of the CTEK Multi

US 800 or the CTEK Multi US 3300 for battery maintenance
charging.

1. Be sure the battery and terminals have been cleaned with a bak-

ing soda and water solution.

NOTE: The sealing strip should NOT be removed and NO

fluid should be added.

2. Be sure the charger and battery are in a well-ventilated area. Be

sure the charger is unplugged from the 110-volt electrical outlet.

3. Connect the red terminal lead from the charger to the positive

terminal of the battery; then connect the black terminal lead of

the charger to the negative terminal of the battery.

4. Plug the charger into a 110-volt electrical outlet.
5. By pushing the Mode button (A) on the left side of the charger,

select the Normal Charge Icon (E). The Normal Charge Indicator

(C) should illuminate on the upper left portion of the charger.

6. The battery will charge to 95% of its capacity at which time the

Maintenance Charge Indicator (D) will illuminate.

NOTE: For optimal charge and performance, leave the charger

connected to the battery for a minimum 1 hour after the Mainte-
nance Charge Indicator (D) illuminates. If the battery becomes
hot to the touch, stop charging. Resume after it has cooled.

7. Once the battery has reached full charge, unplug the charger

from the 110-volt electrical outlet.

NOTE: If, after charging, the battery does not perform to

operator expectations, bring the battery to an authorized
Arctic Cat dealer for further troubleshooting.

3300A

2012 T-14

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Yamaha VK10L Owner'S Manual preview
VK10L
Brand: Yamaha Pages: 98
Yamaha YFM660FS Owner'S Manual preview
YFM660FS
Brand: Yamaha Pages: 191
Honda 2000 TRX 350FE FourTrax Rancher 4x4 ES Owner'S Manual preview
2000 TRX 350FE FourTrax Rancher 4x4 ES
Brand: Honda Pages: 178
Lynx RAVE RS SERIES Operator'S Manual preview
RAVE RS SERIES
Brand: Lynx Pages: 113
Hammerhead 2013 R 150 Owner'S Manual preview
2013 R 150
Brand: Hammerhead Pages: 100
E-TON Viper 150 Owner'S Manual preview
Viper 150
Brand: E-TON Pages: 118
Panasonic KX-TGA571 Installation Manual preview
KX-TGA571
Brand: Panasonic Pages: 20
Panasonic KX-TG5766 Operating Instructions Manual preview
KX-TG5766
Brand: Panasonic Pages: 76
Taylor-Dunn C0-014-32 Operation, T Roubleshooting And Replacement Parts Manual preview
C0-014-32
Brand: Taylor-Dunn Pages: 186
Taylor-Dunn B 1-50 Operation, T Roubleshooting And Replacement Parts Manual preview
B 1-50
Brand: Taylor-Dunn Pages: 240
J&J Amusements Falcon Go-kart 2018 Service Manual preview
Falcon Go-kart 2018
Brand: J&J Amusements Pages: 58
TRILECTRON 90T400SLN Operator preview
90T400SLN
Brand: TRILECTRON Pages: 7
Tomberlin VANISH Operator'S Manual preview
VANISH
Brand: Tomberlin Pages: 142
Arctic Cat 350 Manual preview
350
Brand: Arctic Cat Pages: 70
Arctic Cat 2009 150 Service Manual preview
2009 150
Brand: Arctic Cat Pages: 101
GMX GE-YX125 series Assembly Manual preview
GE-YX125 series
Brand: GMX Pages: 18
American Sportworks 7151 Owner'S Manual / Parts Manual preview
7151
Brand: American Sportworks Pages: 13
Honda 1995 TRX 400 FW Owner'S Manual preview
1995 TRX 400 FW
Brand: Honda Pages: 155

Brands by name

Popular brands

Load more brands