Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 341

Page: 341 / 708

Divis

ion

- Opera

tion

inte

nance

Main TOC

Section TOC

N ext

CF113A

CF116A



NOTE: Arctic Cat recommends

the use of genuine Arctic Cat lubri-
cants.

6. Install the filler plugs and level

plugs.

Hydraulic Hand Brake

738-420B

Brake Fluid

Check the brake fluid level in the brake

fluid reservoir. If the level in the reser-

voir is not visible in the sight glass, add

DOT 4 brake fluid.

738-420A



NOTE: If the sight glass appears

dark, there is a sufficient amount of
fluid in the reservoir.

Brake Lever Lock

Check to make sure the brake lever lock

engages properly and that the brake

(when engaged) locks the wheels.

1. Pump the brake lever 2 or 3 times.
2. Engage the brake lever lock.
3. Attempt to push the ATV.



NOTE: The brake lever lock must

lock the wheels. If it doesn’t, take
the ATV to an authorized Arctic Cat
ATV dealer for service.

Brake Hoses

Carefully inspect the hydraulic brake

hoses for cracks or other damage. If

found, take the ATV to an authorized

Arctic Cat ATV dealer to have the brake

hoses replaced.

Brake Pads

The clearance between the brake pads

and brake discs is adjusted automatically

as the brake pads wear. The only mainte-

nance that is required is replacement of

the brake pads when they show excessive

wear. Check the thickness of each of the

brake pads as follows:

1. Remove a front wheel.
2. Measure the thickness of each brake

pad.

! WARNING

Be sure to inspect the hydraulic
brake system before each use.
Always maintain brakes according
to the Maintenance Schedule.

CF113A

CAUTION

Be careful not to spill any fluid when
filling the brake fluid reservoir. Wipe
away spilled fluid immediately.

2012 350-425

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands