Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 619

Page: 619 / 708

Main TOC

Section TOC

Foreword

Congratulations and thank you from Arc-

tic Cat Inc. for purchasing an ARCTIC

CAT® TRV. Built with American engi-

neering and manufacturing know-how, it

is designed to provide superior ride, com-

fort, and utility.
This Operator’s Manual is furnished to

make sure that the operator and passenger

are aware of safe operating procedures. It

also includes information about the gen-

eral care and maintenance of your ATV.
Carefully read the following pages. If you

have any questions regarding this ATV,

contact an authorized Arctic Cat ATV

dealer for assistance. Remember, only

authorized Arctic Cat ATV dealers have

the knowledge and facilities to provide

you with the best service possible.
This Arctic Cat TRV Operator’s Manual

should be considered a permanent part of

the ATV and must remain with the ATV at

the time of resale. If the ATV changes

ownership more than once, contact Arctic

Cat Inc., Service Department, P.O. Box

810, Thief River Falls, MN 56701, for

proper registration information.
You have chosen a quality Arctic Cat TRV

designed and assembled to give depend-

able service. Be sure, as the owner/opera-

tor of an Arctic Cat TRV, to become

thoroughly familiar with its basic opera-

tion, maintenance, and storage proce-

dures. Read, understand, and follow the

entire Operator’s Manual before operating

the ATV to ensure safe and proper use of

your new Arctic Cat ATV. Always operate

the ATV within your level of skill and cur-

rent terrain conditions.

• Know all local, state/provincial riding

laws,

• Respect your ATV, and
• Respect the environment

We also advise you to strictly follow the

recommended maintenance program as

outlined. This preventive maintenance

program is designed to ensure that all

critical components on this ATV are thor-

oughly inspected at various intervals.

All information in this manual is based

on the latest product data and specifica-

tions available at the time of printing.

Arctic Cat Inc. reserves the right to make

product changes and improvements

which may affect illustrations or explana-

tions without notice.

2411-122A

Arctic Cat and the ATV Safety Institute

recommend that all ATV operators ride the

appropriate-sized ATV according to age.

Protect Your Sport

Parts and

Accessories

When in need of replacement parts, oil,

or accessories for your Arctic Cat TRV,

be sure to use only GENUINE ARCTIC

CAT PARTS, OIL, AND ACCESSO-

RIES. Only genuine Arctic Cat parts,

oil, and accessories are engineered to

meet the standards and requirements of

your Arctic Cat TRV. For a complete list

of accessories, refer to the current Arc-

tic Cat Accessory Catalog.
To aid in service and maintenance pro-

cedures on this ATV, a Service Manual

and an Illustrated Parts Manual are

available through your local Arctic Cat

ATV dealer.

Category

Age

(Years)

Speed

Limitations

(MPH)

Notes

Y-12+

12 or

Older

15 - Limited

30 - Maximum

Operate

Under Adult
Supervision

T-14

14 or

Older

20 - Limited
30 - Limited

38 - Maximum

Operate

Under Adult
Supervision

G & S

16 or

Older

According to

Local Regula-

tions

—

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Brands by name

Popular brands