manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

2

Main TOC

Table of Contents

Foreword .............................................. 1
Parts and Accessories........................ 1
Limited Warranty ................................. 3
Warranty Procedure/Owner 

Responsibility.................................. 4

Arctic Cat ATV Emission Control 

Warranty Statement ........................ 5

Arctic Cat Emission Control 

System Limited Warranty ........... 6

U.S. EPA Emission Control Statement/

Warranty Coverage (U.S. Only) ...... 7

Declaration of Conformity .................. 8

DIVISION I - SAFETY

2-Up ATV Safety Alert ....................... 11
Rider Training Course....................... 12
Hangtags............................................ 13
Warning Labels & Information .... 14-15
Warnings ....................................... 16-25
Prevention..................................... 26-29

Safe Riding Clothing and Gear 

(Operator and Passenger) ........... 26

TRV Condition ................................ 27

T-CLOC..................................... 27

First Aid and Survival...................... 29

Active Riding ..................................... 30
Sound Judgment.......................... 31-35

Environment ................................... 31
Those Around You .......................... 32
Equipment ...................................... 33
Load Capacity Ratings Chart ......... 34
Speedrack ...................................... 34
Personal Choices ........................... 34

SIPDE....................................... 35

Supervision ....................................... 36

Taking Responsibility ...................... 36

Inexperienced Riders ............... 36
Experienced Riders .................. 36

DIVISION II - 

OPERATION/

MAINTENANCE

TRV Specifications....................... 37-38
Location of Parts and Controls........ 39
ATV Operation .............................. 40-50

Basic Operating Maneuvers ........... 40

Starting the Engine................... 40
BONE-C ................................... 40
Starting a Cold Engine ............. 41

Handling the TRV (Active Riding 

Techniques) ................................. 42

Tips................................................. 48

General Information ..................... 51-65

TRV Identification Numbers............ 51
Ignition Switch Key ......................... 51

Control Locations And Functions .... 51
Power Steering (Cruiser)................. 55
Speedometer/LCD (Digital) ............. 56
Speedometer/LCD (Analog/Digital). 58
Electric Fuel Pump.......................... 60
Gas Hoses ...................................... 60
Oil Level Stick.................................. 60
Windshield (Cruiser) ....................... 61
Mirrors (Cruiser).............................. 61
Rear Seat Lock ............................... 61
Front Seat Lock ............................... 62
Storage Box (Cruiser) ..................... 62
Safety Flag Bracket ......................... 62
Rack Loading .................................. 62
Trailering And Towing ...................... 63
Transporting TRV ............................ 63
Gasoline-Oil-Lubricant .................... 64
Engine Break-In .............................. 65
Burnishing Brake Pads.................... 65

General Maintenance ...................66-82

Maintenance Schedule ................... 67
Liquid Cooling System .................... 68
Oil Cooler (1000)............................. 69
Shock Absorbers............................. 69
General Lubrication......................... 69
Hydraulic Hand Brake ..................... 71

Brake Fluid ................................ 71
Brake Lever Lock ...................... 71
Brake Hoses ............................. 71
Brake Pads................................ 71

Rear Foot Brake .............................. 72
Protective Rubber Boots ................. 72
Battery............................................. 73
Spark Plug(s) .................................. 76
Throttle Cable Adjustment............... 76
Air Filter........................................... 77
Air Filter Housing Drains ................. 78
Draining V-Belt Cover...................... 78
Tires ................................................ 78
Wheels ............................................ 79
Muffler/Spark Arrester..................... 79
Light Bulb Replacement .................. 80
Checking/Adjusting Headlight Aim .. 80
Fuses .............................................. 81
Electrical Output Terminals ............. 81
Tool Storage Tray/Battery Hold-

Down ....................................... 81

Preparation For Storage ................... 83
Preparation After Storage ................. 84
Maintenance Record ......................... 85
Change Of Address, Ownership, Or 

Warranty Transfer .......................... 87

Identification Numbers 

Record ................. Inside Back Cover

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Honda 2004 TRX450FE Fourtrax Foreman FE Owner'S Manual preview
2004 TRX450FE Fourtrax Foreman FE
Brand: Honda Pages: 249
Land Pride Gondo 4400EX Operator'S Manual preview
Gondo 4400EX
Brand: Land Pride Pages: 50
TSE T50 BWRC Owner'S Manual preview
T50 BWRC
Brand: TSE Pages: 129
swaploader SL-160 Parts And Operation Manual preview
SL-160
Brand: swaploader Pages: 94
Rider Concept ELECTRIC MINI ATV Owner'S Manual preview
ELECTRIC MINI ATV
Brand: Rider Concept Pages: 29
3M FLEXIGUARD User Instruction Manual preview
FLEXIGUARD
Brand: 3M Pages: 20
E-TON Viper Jr. (RXL-40) Owner'S Manual preview
Viper Jr. (RXL-40)
Brand: E-TON Pages: 23
Labrie Pendpac WITTKE RETRO FL Operator'S Manual preview
Pendpac WITTKE RETRO FL
Brand: Labrie Pages: 98
Valor 12-TU Owner'S Manual preview
12-TU
Brand: Valor Pages: 41
ODES UTVS DOMINATOR X- 2 Assembly Instructions Manual preview
DOMINATOR X- 2
Brand: ODES UTVS Pages: 41
Kellfri 23-TV15ATV Operating Instructions Manual preview
23-TV15ATV
Brand: Kellfri Pages: 24
Yamaha YFZ 50 2017 Owner'S Manual preview
YFZ 50 2017
Brand: Yamaha Pages: 132
KAYO MOTO A150 Assembly Manual preview
A150
Brand: KAYO MOTO Pages: 9
MULTIQUIP WT5HP Operation Manual preview
WT5HP
Brand: MULTIQUIP Pages: 54
Winway FARMBOSS II Owner'S Manual preview
FARMBOSS II
Brand: Winway Pages: 67
Schwinn 13-SC320 Owner'S Manual preview
13-SC320
Brand: Schwinn Pages: 26
SkyLine TRAVEL TRAILER FIFTH WHEEL Owner'S Manual preview
TRAVEL TRAILER FIFTH WHEEL
Brand: SkyLine Pages: 83
CBS Products C-823-13 Operating And Maintenance Manual preview
C-823-13
Brand: CBS Products Pages: 36

Brands by name

Popular brands

Load more brands