Arctic Cat 2012 700 i Cruiser Page 655 Operator'S Manual Download

Page: 655 / 708

IVISION II - OPERA

ION/

NANCE

Main TOC

Section TOC

N ext

DIVISION II - OPERATION/MAINTENANCE
TRV Specifications

Specifications subject to change without notice.

ENGINE AND DRIVE

450 H1

550 H1

700 H1

Type

Four-Cycle/Liquid Cooled

Bore x Stroke

89.0 mm x 71.2 mm

(3.50 x 2.80 in.)

92 mm x 82 mm

(3.62 x 3.22 in.)

102 mm x 85 mm

(4.01 x 3.35 in.)

Displacement

442 cc (27 cu in.)

545 cc (33.3 cu in.) 695 cc (42.4 cu in.)

Spark Plug Type

NGK CR7E

NGK CPR8E

Spark Plug Gap

0.7-0.8 mm

(0.028-0.031 in.)

0.5-0.6 mm (0.019-0.024 in.)

Brake Types

Hydraulic w/Brake Lever Lock and Rear Foot Brake

CHASSIS

Length (Overall)

250.4 cm (98.6 in.)

256.5 cm (101.0 in.) - Cruiser

Height (Overall)

127.8 cm (50.3 in.)

139.7 cm (55.0 in.) - Cruiser

Width (Overall)

120.6 cm (47.5 in.)

Suspension Travel

25.4 cm (10.0 in.)

Tire Size (Front)

AT25 x 8-12

Tire Size (Rear)

AT25 x 10-12

Tire Inflation Pressure

0.35 kg/cm² (5.0 psi)

MISCELLANY

Dry Weight (Approx)

326.1 kg (719 lb)

346.5 kg (764 lb)

353.3 kg (779 lb) -

Cruiser

346.5 kg (764 lb)

354.7 kg (782 lb) -

Cruiser

Gas Tank Capacity

20.1 L (5.3 U.S. gal.)

Coolant Capacity

2.9 L (3.0 U.S. qt)

Differential Capacity

275 ml (9.3 fl oz)

Rear Drive Capacity

250 ml (8.5 fl oz)

Engine Oil Capacity
(Approx)

2.8 L (3.0 U.S. qt)

1.9 L (2.0 U.S. qt)

Gasoline
(Recommended)

87 Octane Regular Unleaded

Engine Oil
(Recommended)

Arctic Cat ACX All Weather (Synthetic)

Differential/Rear Drive
Lubricant

SAE Approved 80W-90 Hypoid

Taillight/Brakelight

12V/8W/27W

Headlight

12V/27W (4)

Starting System

Electric

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands