manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Share
Download
Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 622

4

Previous

Main TOC

Section TOC

Next

Warranty Procedure/Owner Responsibility

At the time of sale, a TRV Owner Registration form is to be completed by the selling dealer
and consumer. The receipt of the form by Arctic Cat is a condition precedent to warranty
coverage. It is the selling dealer’s responsibility to retain and/or submit appropriate copies
of the form to the appropriate place(s) to initiate warranty coverage.

The dealer will furnish to the consumer a signed copy of the form which must be pre-
sented to the dealer when requesting warranty service. The registration form is the con-
sumer’s proof of ownership and warranty eligibility. The form is used by the dealer to
validate the warranty claim. Retain your copy of the form and keep it in a safe place.

When warranty repair is suspected, the TRV should be taken to the selling dealer, who
has the primary responsibility to perform warranty repairs. Subject to the limitations set forth
in the Limited Warranty, i

n the event the selling dealer has ceased to do business, you have

moved, or you are in a location away from your selling dealer, warranty may be performed
by any authorized Arctic Cat ATV dealer.

The authorized Arctic Cat ATV dealer will examine the TRV or part to determine if, in his
opinion, a warrantable condition exists. If a warrantable condition appears to exist, the
dealer will repair or replace, at Arctic Cat’s option, free of charge, including any related
labor costs, all parts that are found to be warrantable and any other parts which the war-
rantable part caused to be damaged. You, the owner, will then be asked to sign a warranty
form to ensure Arctic Cat that the warranty work was actually performed.

It is the owner’s responsibility to maintain and service the TRV in accordance with Arctic
Cat’s recommendations in the Operator’s Manual. To protect yourself and your TRV, follow
all safety and service tips. 

Arctic Cat will NOT warrant repairs required as a result of

not performing standard operator maintenance, storage procedures, and service as
outlined in the Operator’s Manual.

Should you have any questions concerning the warranty, contact an authorized Arctic Cat
ATV dealer.

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands