Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 70 / 708

Main Table of Contents

Foreword

Congratulations and thank you from Arctic Cat Inc. for purchasing an
ARCTIC CAT

All-Terrain Vehicle (ATV). It is designed to provide

superior ride, comfort, utility, and dependable service.
This Operator’s Manual is furnished to make the operator aware of

proper operating procedures. It also includes information about the

general care and maintenance of your ATV.
This Arctic Cat ATV Operator’s Manual should be considered a per-

manent part of the ATV and must remain with the ATV at the time of

resale. If the ATV changes ownership more than once, contact Arctic

Cat Inc., Service Department, P.O. Box 810, Thief River Falls, MN

56701, for proper registration information.
Children differ in skills, physical abilities, and judgment. Some chil-

dren may not be able to operate an ATV safely. Parents should super-

vise their child’s use of the ATV at all times. Parents should permit

continued use only if they determine that the child has the ability to

operate the ATV safely.
Carefully read the following pages. If you have any questions regard-

ing this ATV, contact an authorized Arctic Cat ATV dealer for assis-

tance. Remember, only authorized Arctic Cat ATV dealers have the

knowledge and facilities to provide you with the best service possi-

ble.

• Know all local, state/provincial riding laws,
• Respect your ATV,
• Respect the environment, and
• You will gain the respect of others.

We also advise you to strictly follow the recommended maintenance

program as outlined. This preventive maintenance program is

designed to ensure that all critical components on this ATV are thor-

oughly inspected at various intervals.

All information in this manual is based on the latest product data and

specifications available at the time of printing. Arctic Cat Inc.

reserves the right to make product changes and improvements which

may affect illustrations or explanations without notice.
At the time of publication, all information and illustrations in this

manual were technically correct. Some illustrations used in this man-

ual are used for clarity purposes only and are not designed to depict

actual conditions. Because Arctic Cat Inc. constantly refines and

improves its products, no retroactive obligation is incurred.

Arctic Cat and the ATV Safety Institute recommend that all ATV

operators ride the appropriate-sized ATV according to age.

Protect Your Sport

Parts and Accessories

When in need of replacement parts, oil, or accessories for your Arctic

Cat ATV, be sure to use only GENUINE ARCTIC CAT PARTS, OIL,

AND ACCESSORIES. Only genuine Arctic Cat parts, oil, and acces-

sories are engineered to meet the standards and requirements of your

Arctic Cat ATV. For a complete list of accessories, refer to the current

Arctic Cat ATV Accessory Catalog.
To aid in service and maintenance procedures on this ATV, a Service

Manual and an Illustrated Parts Manual are available through your

local Arctic Cat ATV dealer.

Category Age (Years) Speed Limitations (MPH)

NOTES

Y-12+

12 or Older

15 - Limited

30 - Maximum

Operate Under

Adult Supervision

T-14

14 or Older

20 - Limited
30 - Limited

38 - Maximum

Operate Under

Adult Supervision

G & S

16 or Older

According to

Local Regulations

—

2012 T-14

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands