manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

18

Previous

Main TOC

Section TOC

Next

Warnings

! WARNING

POTENTIAL HAZARD

Operating this ATV after or while consuming alcohol or drugs.

WHAT CAN HAPPEN

Could seriously affect your judgment.
Could cause you to react more slowly.
Could affect your balance and perception.
Could result in an accident.

HOW TO AVOID THE HAZARD

Never consume alcohol or drugs before or while driving this ATV.

! WARNING

POTENTIAL HAZARD

Operating or riding as a passenger on this ATV without
wearing an approved helmet, eye protection, and pro-
tective clothing.

WHAT CAN HAPPEN

Operating or riding as a passenger on this ATV without
an approved helmet increases your chances of a
severe head injury or death in the event of an accident.
Operating or riding as a passenger on this ATV without
eye protection can result in an accident and increases
your chances of a severe injury in the event of an accident.
Operating or riding as a passenger on this ATV without
protective clothing increases your chances of severe
injury in the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved helmet that fits properly.

You should also wear: Eye protection (goggles or face shield)

Gloves

Boots

Long sleeved shirt or jacket

Long pants

! WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances or losing control of the ATV, which can result in an acci-
dent.

HOW TO AVOID THE HAZARD

Always ride at a speed that is proper for the terrain, visibility and operating con-
ditions, and your experience.

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Razor Ground Force Controller Installation Manual preview
Ground Force
Brand: Razor Pages: 2
BRP Can-Am Maverick Sport X mr 1000R Operator'S Manual preview
Can-Am Maverick Sport X mr 1000R
Brand: BRP Pages: 192
B.O.B COZ Owner'S Manual preview
COZ
Brand: B.O.B Pages: 36
Eton ATV8E - SERVICE Service Manual preview
ATV8E - SERVICE
Brand: Eton Pages: 34
HAKO Citymaster 650 Operating Manual preview
Citymaster 650
Brand: HAKO Pages: 190
Oldenbourg group euv-400 Parts And Service Manual preview
euv-400
Brand: Oldenbourg group Pages: 60
Etnyre Black-Topper Shooter II Operation, Maintenance And Safety Manual preview
Black-Topper Shooter II
Brand: Etnyre Pages: 51
Etnyre Black-Topper SHOOTER Series Manual preview
Black-Topper SHOOTER Series
Brand: Etnyre Pages: 84
LONCIN LX500ATV Owner'S Manual preview
LX500ATV
Brand: LONCIN Pages: 156
gio Little Chief Owner'S Manual preview
Little Chief
Brand: gio Pages: 78
PRONAR T683 Operator'S Manual preview
T683
Brand: PRONAR Pages: 147
Polaris 2015 RZR XP 1000 EPS Owner'S Manual preview
2015 RZR XP 1000 EPS
Brand: Polaris Pages: 150
Palms MDT5N25 User Manual preview
MDT5N25
Brand: Palms Pages: 19
PARKIT360 CARRIER 13K Mount Instructions preview
CARRIER 13K
Brand: PARKIT360 Pages: 7
Yamaha 2009 YFM25RY Service Manual preview
2009 YFM25RY
Brand: Yamaha Pages: 293
Cushman HAULER 1200 Repair Manual preview
HAULER 1200
Brand: Cushman Pages: 176
Suzuki LT-4WD 1990 Service Manual preview
LT-4WD 1990
Brand: Suzuki Pages: 508
SeaCom Rolltrailer Operating Manual preview
Rolltrailer
Brand: SeaCom Pages: 21

Brands by name

Popular brands

Load more brands