manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

DIVIS

ION I - 

SA

FE

TY

19

Previous

Main TOC

Section TOC

Next

Warnings

! WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before operating.

Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you use it to make sure the ATV is in safe
operating condition.

Always follow the inspection and maintenance procedures and schedules
described in this Operator’s Manual.

! WARNING

POTENTIAL HAZARD

Removing hands from handlebar grips (operator)/handholds (passenger) or
feet from the footrests during operation.

WHAT CAN HAPPEN

Removing even one hand or foot can reduce your ability to control the ATV or
could cause you to lose your balance and fall off the ATV. If you remove a foot
from the footrest, your foot or leg may come into contact with the wheels, which
could injure you or cause an accident.

HOW TO AVOID THE HAZARD

Always keep both hands on the handlebar grips (operator)/handholds (passen-
ger) and both feet on the footrests of your ATV during operation.

! WARNING

POTENTIAL HAZARD

Going down a hill improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause the ATV to
overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for going down
hills as described in this Operator’s Manual.

Always check the terrain carefully before you start down any hill.

Shift your weight backward.

Never go down a hill at high speed.

Avoid going down a hill at an angle that would cause the ATV to lean sharply to
one side. Go straight down the hill where possible.

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Arctic Cat 150 2013 Operator'S Manual preview
150 2013
Brand: Arctic Cat Pages: 68
ADLY MOTO ATV-320 Owner'S Manual preview
ATV-320
Brand: ADLY MOTO Pages: 42
Polaris ACE 500 2017 Owner'S Manual For Maintenance And Safety preview
ACE 500 2017
Brand: Polaris Pages: 174
Flagro FVO-1000TR Operating Instructions Manual preview
FVO-1000TR
Brand: Flagro Pages: 28
Erde SY150 Assembly Instructions preview
SY150
Brand: Erde Pages: 4
Kinroad 150 Service Manual preview
150
Brand: Kinroad Pages: 80
Tomberlin FireFox 620 User Manual preview
FireFox 620
Brand: Tomberlin Pages: 40
Polaris Sportsman 9921161 Owner'S Manual preview
Sportsman 9921161
Brand: Polaris Pages: 137
E-Z-GO ST SHUTTLE 4/6 E 2008 Owner'S Manual And Service Manual preview
ST SHUTTLE 4/6 E 2008
Brand: E-Z-GO Pages: 66
Landa ECOS 7000 Operator'S Manual preview
ECOS 7000
Brand: Landa Pages: 30
KAYO MOTOR AU125 Service Manual preview
AU125
Brand: KAYO MOTOR Pages: 91
Can-Am commander 800R Shop Manual preview
commander 800R
Brand: Can-Am Pages: 423
FEISHEN FAAT6000 Owner'S Manual preview
FAAT6000
Brand: FEISHEN Pages: 116
CanyCom BP416 Operator'S Manual preview
BP416
Brand: CanyCom Pages: 51
Ezgo 2014 TERRAIN 1000 72V CE Owner'S Manual preview
2014 TERRAIN 1000 72V CE
Brand: Ezgo Pages: 71
PARKIT360 FORCE 5K Instruction Manual & User Manual preview
FORCE 5K
Brand: PARKIT360 Pages: 13
Herculano G2ET 10000 User Manual preview
G2ET 10000
Brand: Herculano Pages: 34
Baja motorsports BA49 Setup Instructions preview
BA49
Brand: Baja motorsports Pages: 7

Brands by name

Popular brands

Load more brands