Arctic Cat 2012 700 i Cruiser Page 638 Operator'S Manual Download

Page: 638 / 708

Main TOC

Section TOC

N ext

Warnings

! WARNING

POTENTIAL HAZARD

Failure to use extra care when operating the ATV on
unfamiliar terrain.

WHAT CAN HAPPEN

You can come upon hidden rocks, bumps, or holes
without enough time to react.

Could result in the ATV overturning or going out of
control.

HOW TO AVOID THE HAZARD

Go slowly and be extra careful when operating on unfamiliar terrain.

Always be alert to changing terrain conditions when operating the ATV.

! WARNING

POTENTIAL HAZARD

Failure to use extra care when operating on rough,
slippery, or loose terrain.

WHAT CAN HAPPEN

Could cause loss of traction or control, which could
result in an accident including a rollover.

HOW TO AVOID THE HAZARD

Do not operate on rough, slippery, or loose terrain
until you have learned and practiced the skills necessary to control the ATV on
such terrain.

Always be especially cautious on these kinds of terrain.

! WARNING

POTENTIAL HAZARD

Turning improperly.

WHAT CAN HAPPEN

The ATV could go out of control, causing a collision or rollover.

HOW TO AVOID THE HAZARD

Always follow proper procedures for turning as described in this Operator’s
Manual.

Practice turning at slow speeds before attempting to turn at faster speeds.

Do not turn at excessive speed.

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands