manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Share
Download
Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 639

DIVIS

ION I - 

SA

FE

TY

21

Previous

Main TOC

Section TOC

Next

Warnings

Never Operate Up Or 

Down Hills Steeper 

Than 25°.

! WARNING

POTENTIAL HAZARD

Operating on steep hills.

WHAT CAN HAPPEN

The ATV can overturn more easily on steep hills than
on level surfaces or small hills.

HOW TO AVOID THE HAZARD

Never operate the ATV on hills too steep for the ATV
or for your abilities.

Practice on smaller hills before attempting larger hills.

! WARNING

POTENTIAL HAZARD

Climbing hills improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause the ATV to
overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for climbing hills as
described in this Operator’s Manual.

Always check the terrain carefully before you start up any hill.

Never climb hills with slippery or loose surfaces.

Shift your weight forward.

Never open the throttle suddenly or make sudden gear changes. The ATV
could flip over backwards.

Never go over the top of any hill at high speed. An obstacle, a sharp drop, or
another ATV or person could be on the other side of the hill.

2011 TRV

2012 TRV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands