Arctic Cat 2012 700 i Cruiser Operator'S Manual Download | Manualshive

Page: 81 / 708

background image

12

Main Table of Contents

Section Table of Contents

Warnings

! WARNING

POTENTIAL HAZARD

Going down a hill improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause
the ATV to overturn.

HOW TO AVOID THE

HAZARD

Always follow proper procedures for
going down hills as described in this Operator’s Manual.
Always check the terrain carefully before you start down any hill.
Shift your weight backward.
Never go down a hill at high speed.
Avoid going down a hill at an angle that would cause the ATV to
lean sharply to one side. Go straight down the hill where possible.

! WARNING

POTENTIAL HAZARD

Improperly operating over obstacles.

WHAT CAN HAPPEN

Could cause loss of control or a collision. Could cause the ATV to
overturn.

HOW TO AVOID THE HAZARD

Before operating in a new area, check for obstacles.
Never attempt to ride over large obstacles, such as large rocks or
fallen trees.
When you go over obstacles, always follow proper procedures as
described in this Operator’s Manual.

! WARNING

POTENTIAL HAZARD

Skidding or sliding.

WHAT CAN HAPPEN

You may lose control of the ATV.
You may also regain traction unexpectedly, which may cause the
ATV to overturn.

HOW TO AVOID THE HAZARD

Learn to safely control skidding or sliding by practicing at slow
speeds and on level, smooth terrain.
On extremely slippery surfaces, such as ice, go slowly and be
very cautious in order to reduce the chance of skidding or sliding
out of control.

! WARNING

POTENTIAL HAZARD

Operating the ATV with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of the ATV
may cause changes in handling which, in some situations, could
lead to an accident.

HOW TO AVOID THE HAZARD

Never modify the ATV through improper installation or improper
use of accessories. All parts and accessories added to this ATV
should be genuine Arctic Cat ATV components designed for use
on the ATV and should be installed and used according to instruc-
tions. Never install a twist grip throttle. If you have questions, con-
sult an authorized Arctic Cat ATV dealer.

2012 T-14

«
...
79
80
81
82
83
...
»

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Brand: Polaris Pages: 690

Brand: Rayco Pages: 88

Brand: Yamaha Pages: 18

Brand: HYOSUNG Pages: 60

Steely 1260.400

Brand: Humbaur Pages: 4

Brand: Realtree Pages: 12

Brand: gio Pages: 20

Brand: Qlink Pages: 168

WILD HP 450 - 2005

Brand: GAS GAS Pages: 71

Brand: Yamaha Pages: 178

Brand: Yamaha Pages: 156

Sasquatch 800 UTV

Brand: Daymak Pages: 16

Brand: Yamaha Pages: 169

Brand: Yamaha Pages: 351

1991-1993 Exciter II - 570

Brand: Yamaha Pages: 440

Brand: Yamaha Pages: 1362

Brand: Crossfire Pages: 56

Brand: Crossfire Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands