manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

67

Divis

ion 

II

 - Opera

tion

/

Ma

inte

nance

Previous

Main TOC

Section TOC

Next

Tubeless Tire Repair

Should a leak or flat tire occur due to a

puncture, the tire may be repaired using a

plug-type repair. If the damage is from a

cut or if the puncture cannot be repaired

using a plug, the tire must be replaced.

When operating the ATV in areas where

transportation or service facilities are not

readily available, it is strongly recom-

mended to carry a plug-type repair kit

and a tire pump along.

Wheels

1. Park the ATV on level ground and

engage the brake lever lock.

2. Loosen the lug nuts on the wheel to

be removed.

3. Elevate the ATV.
4. Remove the lug nuts.
5. Remove the wheel.
6. Install the wheel and install the lug

nuts.

7. Tighten the nuts in a crisscross pat-

tern to 32 ft-lb.

8. Remove the jack.

Muffler/Spark Arrester

The muffler has a spark arrester which

must be periodically cleaned. At the

intervals shown in the Maintenance

Schedule, clean the spark arrester using

the following procedure.

1. Remove the cap screw (1) securing

spark arrester; then remove the

arrester (2).

KM139A

2. Using a brush, clean the carbon

deposits from the arrester screen (3)

taking care not to damage the

screen.

KM140B

NOTE: If the screen is damaged in

any way, it must be replaced.

3. Install the spark arrester and secure

with the cap screw.

Light Bulb Replacement

The wattage rating of each bulb is shown

in the chart. When replacing a burned

bulb, always use the same wattage rating.

NOTE: The bulb portion of the

headlight is fragile. HANDLE WITH
CARE. When replacing the head-
light bulb, do not touch the glass
portion of the bulb. If the glass is
touched, it must be cleaned with a
dry cloth before installing. Skin oil
residue on the bulb will shorten the
life of the bulb.  

! WARNING

Failure to tighten the wheel nuts to
the specified torque value can be
hazardous. If the wheel nuts are not
properly tightened, the wheel can
come off causing an accident and
possible injury.

! WARNING

Wait until the muffler cools to avoid
burns.

Headlight

12V/35W/35W 

Taillight/Brakelight

12V/5W/21W

CAUTION

Use only specified bulbs indicated in
the chart as replacement bulbs.

2012 300

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

Landoll 318C Operator'S Manual preview
318C
Brand: Landoll Pages: 76
Sakai GW750-2 Operating & Maintenance Instructions preview
GW750-2
Brand: Sakai Pages: 77
Texas Off-Roader 36EL User Manual preview
Off-Roader 36EL
Brand: Texas Pages: 27
J&J Amusements Double Eagle - Electric Service Manual preview
Double Eagle - Electric
Brand: J&J Amusements Pages: 275
Axis 450cc Owner'S Manual preview
450cc
Brand: Axis Pages: 63
Axis E1 Owner'S Manual preview
E1
Brand: Axis Pages: 74
Yamaha MM600D Service Manual preview
MM600D
Brand: Yamaha Pages: 213
Yamaha MM600D Manual preview
MM600D
Brand: Yamaha Pages: 282
Yamaha Grizzly550 User Manual preview
Grizzly550
Brand: Yamaha Pages: 443
TOMCAR TM2 Owner'S Manual preview
TM2
Brand: TOMCAR Pages: 106
YSI EcoMapper Manual preview
EcoMapper
Brand: YSI Pages: 118
JI-EE ATV BXL 100 Service Manual preview
ATV BXL 100
Brand: JI-EE Pages: 61
Polaris Ranger RZR SW Service Manual preview
Ranger RZR SW
Brand: Polaris Pages: 346
Landoll 825A Operator'S Manual preview
825A
Brand: Landoll Pages: 70
Kellfri 23-TV15ATV Operating Instructions Manual preview
23-TV15ATV
Brand: Kellfri Pages: 24
Yamaha SL338D Service Manual preview
SL338D
Brand: Yamaha Pages: 112
Yamaha YFM250XL(C) Service Manual preview
YFM250XL(C)
Brand: Yamaha Pages: 398
Cushman HAULER 1200 Repair Manual preview
HAULER 1200
Brand: Cushman Pages: 176

Brands by name

Popular brands

Load more brands