manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

74

Previous

Main TOC

Section TOC

Next

Air Filter

The air filter inside the air filter housing

must be kept clean to provide good engine

power and gas mileage. If the ATV is used

under normal conditions, service the filter

at the intervals specified in the Mainte-

nance Schedule. If operated in dusty, wet,

or muddy conditions, inspect and service

the filter more frequently. Use the follow-

ing procedure to remove the filter and

inspect and/or clean it.

1. Remove the fasteners securing the

storage compartment and remove the

storage compartment.

2. Remove the air filter housing cover

and the air filter/frame assembly.

3. Remove the foam element from the

frame making sure not to tear the ele-

ment.

GZ019

FI515

CD747

4. Fill a wash pan larger than the ele-

ment with a non-flammable solvent;

then dip the element in the solvent

and wash it.

NOTE: Foam Air Filter Cleaner and

Foam Air Filter Oil are available from
Arctic Cat.

5. Squeeze the element by pressing it

between the palms of both hands to

remove excess solvent. Do not twist

or ring the element or it will develop

cracks.

6. Dry the element.
7. Put the element in a plastic bag; then

pour in air filter oil and work the oil

into the element.

8. Squeeze the element to remove

excess oil.

9. Clean any dirt or debris from inside

the air cleaner. 

10. Install the air filter/frame assembly

and cover.

11. Install the storage compartment and

cover.

Air Filter Housing 

Drain(s)

Inspect the “duck bill” drain(s) beneath

the main housing for debris and for

proper sealing.

CAUTION

Failure to inspect the air filter fre-
quently if the ATV is used in dusty,
wet, or muddy conditions can dam-
age the engine.

H2

450

CAUTION

A torn air filter can cause damage to
the ATV engine. Dirt and dust may get
inside the engine if the element is torn.
Carefully examine the element for tears
before and after cleaning it. Replace
the element with a new one if it is torn.

550/700

2012 Generic ATV

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

JLG Triple-L 1012 Operation & Safety And Service Manual preview
Triple-L 1012
Brand: JLG Pages: 62
LAMAX eFalcon ATV50M User Manual preview
eFalcon ATV50M
Brand: LAMAX Pages: 150
Polaris Trail Boss 330 Quadricycle Owner'S Manual preview
Trail Boss 330 Quadricycle
Brand: Polaris Pages: 119
ASV ST50 Scout Operation And Maintenance Manual preview
ST50 Scout
Brand: ASV Pages: 60
Can-Am 2009 Outlander 500 EFI Operator'S Manual preview
2009 Outlander 500 EFI
Brand: Can-Am Pages: 152
Salsco TRANZ-FORMER 5-G Operator And Parts Manual preview
TRANZ-FORMER 5-G
Brand: Salsco Pages: 42
Yamaha Warrior YFM350XRC Owner'S Manual preview
Warrior YFM350XRC
Brand: Yamaha Pages: 174
Yamaha Raptor YFM7RZ Owner'S Manual preview
Raptor YFM7RZ
Brand: Yamaha Pages: 154
Metal-Fach SEG PELLET Technical And Operational Documentation preview
SEG PELLET
Brand: Metal-Fach Pages: 60
Omnitracs Trailer Tracks 150 Installation And Troubleshooting Manual preview
Trailer Tracks 150
Brand: Omnitracs Pages: 52
Woodland Mills Multilander Logging Trailer with Utility Box Operator'S Manual preview
Multilander Logging Trailer with Utility Box
Brand: Woodland Mills Pages: 36
Woodland Mills MULTILANDER Operator'S Manual preview
MULTILANDER
Brand: Woodland Mills Pages: 48
Thump ATV110CC Owner'S Manual preview
ATV110CC
Brand: Thump Pages: 78
Snorkel SR5719 Operator And Maintenance Manual preview
SR5719
Brand: Snorkel Pages: 160
Snow Hawk 600HO Set-Up, Service And Shop Manual preview
600HO
Brand: Snow Hawk Pages: 207
PITBULL JA400 Maintenance Manual preview
JA400
Brand: PITBULL Pages: 267
MDC MOD X 2021 Owner'S Manual preview
MOD X 2021
Brand: MDC Pages: 59
MDC Robson XTT 2015 Owner'S Manual preview
Robson XTT 2015
Brand: MDC Pages: 108

Brands by name

Popular brands

Load more brands