Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 3 / 708

Main Table of Contents

Section Table of Contents

Division I - Rider Awareness/

Responsibility

Foreword

Congratulations and thank you from Arctic Cat Inc. for purchasing an
ARCTIC CAT

All-Terrain Vehicle (ATV). It is designed to provide

superior ride, comfort, and utility.
This Operator’s Manual is furnished to make the operator aware of

proper operating procedures. It also includes information about the

general care and maintenance of your ATV.
Children differ in skills, physical abilities, and judgment. Some chil-

dren may not be able to operate an ATV safely. Parents should super-

vise their child’s use of the ATV at all times. Parents should permit

continued use only if they determine that the child has the ability to

operate the ATV safely.
Carefully read the following pages. If you have any questions regard-

ing this ATV, contact an authorized Arctic Cat ATV dealer for assis-

tance. Remember, only authorized Arctic Cat ATV dealers have the

knowledge and facilities to provide you with the best service possi-

ble.

• Know all local, state/provincial riding laws,
• Respect your ATV,
• Respect the environment, and
• You will gain the respect of others.

We also advise you to strictly follow the recommended maintenance

program as outlined. This preventive maintenance program is

designed to ensure that all critical components on this ATV are thor-

oughly inspected at various intervals.
All information in this manual is based on the latest product data and

specifications available at the time of printing. Arctic Cat Inc.

reserves the right to make product changes and improvements which

may affect illustrations or explanations without notice.

Arctic Cat and the ATV Safety Institute recommend that all ATV

operators ride the appropriate-sized ATV according to age.

Protect Your Sport

Category

Age (Years)

Speed Limitations

(MPH)

NOTES

Y-12+

12 or Older

15 - Limited

30 - Maximum

Operate Under

Adult Supervision

T-14

14 or Older

20 - Limited
30 - Limited

38 - Maximum

Operate Under

Adult Supervision

G & S

16 or Older

According to

Local Regulations

—

2012 Y-12

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands