manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Share
Download
Arctic Cat 2012 700 i Cruiser Operator'S Manual Download Page 2

Main Table of Contents

Section Table of Contents

Next

Your ATV can be hazardous to 

operate.

A collision or rollover can occur quickly, even during routine maneu-

vers such as turning and driving on hills or over obstacles, if you fail

to take proper precautions.
For your safety, understand and follow all the warnings contained in

this Operator’s Manual and the labels on your ATV.
Keep this Operator’s Manual with your ATV at all times.
FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS

MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH.
Training is available: U.S. owners, call 800-887-2887; Canadian

owners, call 613-739-1535.
Un cours d’instruction est disponible: pour les propriétaires cana-

diens, composez le 613-739-1535.
Particularly important information is distinguished in this manual by

the following notations:

California Proposition 65

!

The Safety Alert Symbol means
ATTENTION! BE ALERT! YOUR
SAFETY IS INVOLVED.

! WARNING

WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.

CAUTION

CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.

NOTE:

A NOTE provides key information to
make procedures easier or more
clear.

! WARNING 

This product contains or emits chemicals known to the State
of California to cause cancer and birth defects or other repro-
ductive harm.

2012 Y-12

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands