manualshive.com logo in svg

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

The Arctic Cat 2012 700i Cruiser Operator's Manual is an essential resource for owners of this reliable ATV. This comprehensive manual provides valuable instructions and guidance for operating and maintaining the vehicle. Download it for free from manualshive.com to ensure a hassle-free riding experience.

Share
Download
background image

2

Main TOC

Table of Contents

Foreword................................................. 1
Parts and Accessories .......................... 1

DIVISION I - SAFETY

ATV Safety Alert..................................... 4
Rider Training Course ........................... 5
Hangtags ................................................ 6
Warning Labels & Information.............. 7
Warnings ...........................................8-15
Prevention .......................................16-19

Safe Riding Clothing and Gear.............. 16
Condition of the ATV............................... 17

T-CLOC........................................... 17

First Aid and Survival.............................. 18

Active Riding........................................ 20
Sound Judgment ............................21-25

Environment............................................ 21
Those Around You.................................. 22
Equipment............................................... 23
Load Capacity Ratings Chart................. 24
Speedrack............................................... 24
Personal Choices.................................... 24

SIPDE............................................. 25

Supervision .......................................... 26

Taking Responsibility.............................. 26

Inexperienced Riders..................... 26
Experienced Riders ....................... 26

DIVISION II - 

OPERATION/ 

MAINTENANCE

ATV Specifications .............................. 27
Location of Parts and Controls .......... 28
ATV Operation .................................29-39

Basic Operating Maneuvers................... 29

Starting the Engine ........................ 29
BONE-C ......................................... 29
Starting A Cold Engine (350) ........ 29
Starting A Cold Engine (425) ........ 30

How to Handle the ATV (Active Riding 

Techniques) .....................................31

Tips.......................................................... 37

General Information........................40-50

ATV Identification Numbers.................... 40
Ignition Switch Key.................................. 40
Control Locations and Functions........... 40
LCD Guage............................................. 44
Primer - Cold Start (350)........................ 45
Gas/Vent Hoses...................................... 45
Carburetor Float Bowl Drain (350)......... 46
Electric Fuel Pump (425)........................ 46
Oil Level Stick.......................................... 46
Seat Latch............................................... 47

Safety Flag Bracket.................................47
Rack Loading (Front and Rear)..............47
Trailering and Towing ..............................47
Transporting ATV.....................................48
Gasoline-Oil-Lubricant ............................48
Engine Break-In.......................................49
Burnishing Brake Pads ...........................49

General Maintenance ..................... 51-65

Maintenance Schedule...........................51
Oil Cooler (350) .......................................52
Liquid Cooling System (425) ..................52
Shock Absorbers.....................................53
General Lubrication.................................53
Hydraulic Hand Brake.............................55

Brake Fluid......................................55
Brake Lever Lock............................55
Brake Hoses ...................................55
Brake Pads .....................................55

Rear Foot Brake ......................................56
Protective Rubber Boots.........................56
Battery......................................................57
Spark Plug...............................................60
Engine Idle RPM Adjustment (350) .......60
Throttle Cable Adjustment ......................61
Air Filter....................................................61
Air Filter Housing Drain...........................62
Draining V-Belt Cover..............................62
Tires .........................................................62
Wheels.....................................................63
Muffler/Spark Arrester.............................63
Light Bulb Replacement .........................63
Checking/Adjusting Headlight Aim.........64
Fuses .......................................................65
Tools.........................................................65

Preparation for Storage .......................66
Preparation after Storage ....................67
Maintenance Record ............................68
Limited Warranty..................................69
Warranty Procedure/Owner 

Responsibility...................................70

Change of Address, Ownership, or 

Warranty Transfer.............................71

Arctic Cat ATV Emission Control 

Warranty Statement .........................73

Arctic Cat Emission Control System 

Limited Warranty ..............................74

U.S. EPA Emission Control 

Statement/Warranty Coverage - 
ATV (U.S. Only) ..........................75

Declaration Of Conformity ..................76
Identification Numbers Record.... Inside 

Back Cover

2012 350-425

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 700 i Cruiser

MANCO 415-271 Operator'S Manual preview
415-271
Brand: MANCO Pages: 4
Polaris GENERAL 2016 Service Manual preview
GENERAL 2016
Brand: Polaris Pages: 690
Komatsu BR580JG-1 Brochure preview
BR580JG-1
Brand: Komatsu Pages: 4
Can-Am OUTLANDER 6x6 2021 Series Operator'S Manual preview
OUTLANDER 6x6 2021 Series
Brand: Can-Am Pages: 204
Can-Am DS 450 Series Operator'S Manual preview
DS 450 Series
Brand: Can-Am Pages: 160
FARMA C 3,8D Instruction Book preview
C 3,8D
Brand: FARMA Pages: 36
HYOSUNG TE 100 Manual preview
TE 100
Brand: HYOSUNG Pages: 60
Humbaur Steely 1260.400 Mounting Instructions preview
Steely 1260.400
Brand: Humbaur Pages: 4
Cectec ESTOC Service Manual preview
ESTOC
Brand: Cectec Pages: 212
Hammerhead Rave 150 HH150 Operator'S Manual preview
Rave 150 HH150
Brand: Hammerhead Pages: 24
Ifor Williams Trailers CT166G Operator'S Manual preview
CT166G
Brand: Ifor Williams Trailers Pages: 12
FARMA T 12 Instruction Book preview
T 12
Brand: FARMA Pages: 13
Ifor Williams Trailers CT166 Owner'S Manual preview
CT166
Brand: Ifor Williams Trailers Pages: 55
Landa 1.103-801.0 Operator'S Manual preview
1.103-801.0
Brand: Landa Pages: 14
Razor CRAZY CART SHUFFLE Owner'S Manual preview
CRAZY CART SHUFFLE
Brand: Razor Pages: 12
Baja motorsports WD400U Setup Instructions preview
WD400U
Brand: Baja motorsports Pages: 11
Eager Beaver 20 Ton XPT Service Manual preview
20 Ton XPT
Brand: Eager Beaver Pages: 59
Herculano G2ET 10000 User Manual preview
G2ET 10000
Brand: Herculano Pages: 34

Brands by name

Popular brands

Load more brands