Arctic Cat 2012 700 i Cruiser Operator'S Manual Download

Page: 313 / 708

Divis

ion

- Opera

tion

inte

nance

Main TOC

Section TOC

N ext

DIVISION II - OPERATION/

MAINTENANCE
ATV Specifications

Specifications subject to change without notice.

ENGINE

350

425

Type

Four-Cycle/Oil Cooled

Four-Cycle/Liquid Cooled

Bore x Stroke

81 mm x 71.2 mm (3.19 x 2.80
in.)

89 mm x 71.12 mm (3.5 x
2.8 in.)

Displacement

366 cc (22.33 cu in.)

442 cc (27 cu in.)

Spark Plug Type

NGK CPR8E

NGK CR7E

Spark Plug Gap

0.5-0.6 mm (0.019-0.024 in.)

0.7-0.8 mm (0.028-0.031 in.)

Brake Type

Hydraulic w/Brake Lever Lock and Rear Foot Brake

CHASSIS

Length (Overall)

211.6 cm (83.3 in.)

Height (Overall)

116.8 cm (46.0 in.)

117.6 cm (46.3 in.)

Width (Overall)

111.7 cm (44.0 in.)

Suspension Travel
(Front/Rear)

17.7 cm (7.0 in.)

Tire Size (Front)

24 x 8-12

25 x 8-12

Tire Size (Rear)

24 x 10-12

25 x 10-12

Tire Inflation Pressure

27.6 kPa (4.0 psi)

MISCELLANY

Dry Weight (Approx)

265.4 kg (585 lb)

276.7 kg (610 lb)

Gas Tank Capacity (Rated)

15.1 L (4.0 U.S. gal.)

Differential Capacity

275 ml (9.3 fl oz)

Coolant Capacity

N/A

2.9 L (3.0 U.S. qt)

Rear Drive Capacity

250 ml (8.5 fl oz)

Engine Oil Capacity
(Approx)

2.8 L (3.0 U.S. qt)

Gasoline (Recommended)

87 Octane Regular Unleaded

Engine Oil (Recommended) Arctic Cat ACX All Weather (Synthetic)

Differential/Rear Drive
Lubricant

SAE Approved 80W-90 Hypoid

Taillight/Brakelight

12V/5W/21W

Headlight

12V/35W (4)

Starting System

Electric

2012 350-425

Summary of Contents for 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands

Arctic Cat 2012 700 i Cruiser, Operator'S Manual

Search results

Summary of Contents for 2012 700 i Cruiser

Reviews:

Related manuals for 2012 700 i Cruiser

Brands by name

Popular brands