7.10 Configuring Multimode Relays
65
5. Repeat the previous step to add new or remove unnecessary scheduled relay events.
6. When finished scheduling relays, click Apply then OK to close the window.
7.10.2
Configuring Pulse-Per-Hour Mode
1. Select Pulse Per Hour mode by first selecting the relay and checking “One Pulse Per Hour”
in the right panel. See Figure 7.16
2. Now, click the + sign to the left of the desired relay and choose “Pulse Per Hour” in the tree
below the relay. On the right panel, adjust the offset if desired. Click OK when finished. See
Figure 7.17.
Figure 7.17: Configure Pulse-Per-Hour Mode
7.10.3
Configuring KYZ Pulse Metering
1. Select KYZ mode by selecting the specific relay and choosing “KYZ Only.” See Figure 7.18.
Click the + sign to expand the sub-tree to reveal the modes. Select “KYZ Output” under
the relay and then select the energy value for recording.
Figure 7.18: Configure KYZ Mode
2. Click OK to install KYZ Outputs configuration and close the configuration window.
