94
Working with Broadcast Data
Figure 9.4: Energy Data Summary Screen
Figure 9.5: Energy Data Spreadsheet Screen
1. Make certain that there is an open connection with the 1133A. If you are not connected, see
“Connecting with the 1133A” on page 42. Only basic permission required.
2. From the main menu select Connection
>
Acquire Broadcast
>
Energy Data, or click the
Energy Data button on the Broadcast toolbar to initiate viewing energy data.
3. When the Save As window appears, use the default file name or type in your own file name.
Also, use the browse feature to locate files.
4. Click Save and all available energy data should begin streaming into the specific broadcast
data screen at a rate of once per second. Data is synchronized with the 1 PPS signal from
the GNSS receiver and simultaneously saved to file.
5. Pause or Stop the data stream by clicking the Stop or Pause button. If “Paused”, the buffered
data will continue but not appear on the screen. Later, when Pause is removed, the buffered
data will fill the screen. The “Stop This” button will only terminate the stream of data on
top. The “Stop All” button will terminate all data being broadcast from the 1133A
6. Use the Filter Data tool to limit the data parameters visible in this window. See Filter Data
Selection Tool on page 91 for more information.
