100
Working with Broadcast Data
Figure 9.11: Phasor Data Screen
Figure 9.12: Phasor-Frequency Plot Data Screen
6. To terminate this broadcast session, click the “Stop This” button, or select Connection
>
Stop Broadcast.
7. Click the Close button on the Phasor window when finished viewing the phasor broadcast.
9.8
Logging Phase Data
Use Phase Data to compare any voltage or current phase angle using A-phase voltage or A-phase
current as the reference. When selected, all phase data from every input signal is delivered to the
Relative Phase window. Phase Data are synchronized to the GNSS, sent out real time at a rate of
once-per-second and simultaneously saved in a file of choice. See Figures 9.13 and 9.14.
1. Make certain that there is an open connection with the 1133A. If you are not connected, see
“Connecting with the 1133A” on page 42. Only basic permission required.
2. From the main menu select Connection
>
Acquire Broadcast
>
Phase, Relative (C
R) or click the Phase Data button.
