9.3 Logging Energy Data
93
Figure 9.2: Basic Data Summary Screen
Figure 9.3: Basic Data Spreadsheet Screen
4. When the Save As window appears, use the default name or type in your own file name. Also,
use the browse feature to save to a desired location.
5. Click Save and the data should begin streaming into the specific broadcast data screen at a
rate of once per second. Data is synchronized with the 1 PPS signal from the GNSS receiver
and simultaneously saved to file.
6. Pause or stop the data stream by clicking the Stop or Pause button. If “Paused”, the data
will accumulate in the computer buffer but not print to the screen. Later, when Pause is
removed, the buffered data will fill the screen. The “Stop This” button will only terminate
the stream of data on top. The “Stop All” button will terminate all data being broadcast
from the 1133A.
7. Use the Filter Data tool to limit the data parameters visible in this window. See page 91,
under Filter Data Selection Tool, for more information.
9.3
Logging Energy Data
Energy Data includes all of the values shown in the Broadcast Data windows seen in Figures 9.4
and 9.5 below. Data includes Watt-hours, VAR-hours, VA-hours, Q-hours, for all phases delivered
and received and totals. Energy data are synchronized to the GNSS, sent real time at a rate of
once-per-second and simultaneously saved to a file of choice.
