APRILIA Caponord 1200 2016 Manual Download Page 76

Page: 76 / 573

Recommended products

Piaggio Group recommends the products of its

"Castrol Official Partner" for the scheduled

maintenance of its vehicles.

Use lubricants and liquids having specifications

that are equivalent, or superior, to the recommen-

ded products. These indications also apply when

topping up fluid levels.

ECOMMENDED

PRODUCTS

TABLE

Product

Description

Specifications

Engine oil 15W-50

Synthetic-based lubricant for four-stroke

engines.

SAE 15W-50, JASO MA, MA2; API SJ;

ACEA A3

FUCHS TITAN SAF 1091

Fork oil.

Application - Caponord 1200

OJ RACING FORK OIL TYPE 01

Fork oil.

Application - Caponord 1200 Travel Pack

FUCHS TITAN SAF 1091

Fork oil.

Rear active monoshock actuator (Capo-

nord 1200 Travel Pack)

Lithium-based grease

Lithium-calcium soap based grease

colour - black, contains EP (Extreme

Pressure) additives, excellent water-re-

pellent properties

Spray grease for chains

Spray lubricant grease

Brake fluid DOT 4

Synthetic brake fluid.

SAE J 1703; FMVSS 116; ISO 4925; CU-

NA NC 956 DOT4

Anti-freeze liquid, ready to use, colour red Ethylene glycol antifreeze liquid with or-

ganic inhibition additives. Red, ready to

use.

ASTM D 3306 - ASTM D 4656 - ASTM D

4985 - CUNA NC 956-16

Strumento di diagnosi

Attivazioni

Spark plug

At regular intervals, remove the spark plug and clean off any carbon deposits or replace as required.

CAUTION

ALWAYS REPLACE ALL SPARK PLUGS, EVEN IF ONLY ONE NEEDS REPLACING.

•

Remove the saddle.

•

Remove the side fairings.

In order to reach the spark plugs:

CAUTION

BEFORE CARRYING OUT THE FOLLOWING OPERATIONS AND IN ORDER TO AVOID BURNS,
LEAVE ENGINE AND EXHAUST TO COOL OFF TO AMBIENT TEMPERATURE.

Maintenance

Caponord 1200 - Caponord 1200 Rally

MAIN - 76

Summary of Contents for Caponord 1200 2016






























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Caponord 1200 2016

Reviews:

Brands by name

Popular brands

APRILIA Caponord 1200 2016, Manual

Search results

Summary of Contents for Caponord 1200 2016

Reviews:

Brands by name

Popular brands