manualshive.com logo in svg

APRILIA Caponord 1200 2016, Manual

Share
Download
APRILIA Caponord 1200 2016 Manual Download Page 311

Checking the pusher plate

Check the thrust plate and the bearing for damage

and wear. If necessary, replace the parts.

Checking the clutch hub

Check the clutch hub for damage and wear that

may result in clutch irregular operation. If neces-

sary, replace the bell.

Checking the springs

•

Check the springs for damage and, if

necessary, replace the them all togeth-

er.

•

Measure the clutch spring length when

unloaded; if necessary, replace the

springs all together.

Clutch spring length when unloaded: 69.2 +/- 5

mm (2.72 +/- 0.2 in)

OPTION 02

For clutch packs with NOT PAINTED thrust plate spring and spring cup of 10.5mm, installed on engines

with serial number from 4074 to 4285, in case of replacement of the springs they must be replaced with

a kit containing the following: GREEN painted springs and spring cups of 5.8mm. As indicated in the

spare parts catalogue.

Caponord 1200 - Caponord 1200 Rally

Engine

ENG - 311

Summary of Contents for Caponord 1200 2016






























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands