IT
GB
DE
FR
ES
C13222
420_1.
fm
- 17 -
English
8 -
Check that the "slow
start-up" device is cor-
rectly positioned.
9 - Switch off the appliance,
turn off the gas supply tap ,
and disconnect the pres-
sure gauge
(C)
and retight-
en the screw
(B)
.
10-Close the door
(A)
when
the operation is complete.
The appliance has been tested before being put
into service.
The information provided below is intended to as-
sist in the identification and correction of any anom-
alies and malfunctions which might occur during
use.
The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience
acquired in the specific sector of operation.
FAULT
6
TROUBLESHOOTING
Fault
Causes
Remedies
Smell of gas.
Occasional leak because flame
has gone out.
Turn off the gas supply tap and
ventilate the room.
The flame is yellow.
Burner dirty, heat exchange pipes
clogged, condensation drips.
Contact the after-sales
service.
.
The appliance does
not heat up.
Check the thermostat and activate
any start-up enabling device.
Contactor not receiving power or
faulty.
Check or replace the contactor
coil.
The control panel does not
come on
Electronic circuit board not
receiving electrical power.
Check or swap the phase wire
connections.
Information
IDM-39603803100.tif
0°
270°
