IT
GB
DE
FR
ES
- 16 -
C13222
420_1.
fm
English
IT
GB
DE
FR
ES
To carry out this operation, proceed as follows.
1 - Switch the appliance off and leave it to cool
(see page 12).
2 - Turn off the circuit-breaker to disconnect it from
the electrical mains.
3 - Drain and filter the oil (see page 13).
4 - Remove and clean the baskets and the basket
support structure
(A)
.
5 - Apply a food-grade detergent to the inside of
the well.
6 - Rinse the well with drinking water and drain.
7 - Apply a specific product or a water and vinegar
solution to the well to remove the detergent res-
idues.
8 - Rinse, empty and dry the well.
9 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
Important
When using water for routine cleaning,
check that there are no traces of water left
in the well, on the accessories and in the
drain line before refilling with oil.
To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Open the hatch
(A)
.
3 - Undo the screw
(B)
of the pressure connection.
4 - Connect the pressure gauge
(C)
to the pres-
sure test point.
5 - Turn the gas supply tap back on.
6 - Switch on the appliance (see page 9).
7 - Perform a cooking cycle without food at the
maximum temperature then check that the
pressure reading complies with the values pro-
vided in the table at the back of the manual.
CLEANING THE WELL, BASKET SUPPORT AND ACCESSORIES
CHECKING GAS PRESSURE
IDM-39615303300.tif
A
50
48
46
44
40
38
36
IDM-39619401200.tif
A
B
C
