AMX Epica DGX 144, Instruction Manual

Page: 55 / 107

Epica DGX 144 HD-15 RGBHV Input Board
51 Epica DGX 144 Instruction Manual
Epica DGX 144 HD-15 RGBHV Input Board
Applicability Notice
This chapter pertains to the following Epica DGX 144 HD-15 RGBHV input board:
FG1055-480 Input board
Epica DGX 144 enclosures can hold up to nine DGX 144 HD-15 RGBHV input boards with sixteen HD-
15 connectors each. Each enclosure holds a maximum of nine input and nine output boards (for available
output boards, see the “Applicability Notice” on page 7), accommodating connector configurations up to
a maximum of 144x144, as well as subsets (e.g., 128x64 and 80x112).
DGX HD-15 RGBHV input boards route signals to any type of Epica DGX 144 output board. When
routing signals between different board types, the Epica DGX 144 automatically converts the signal
format (analog to digital or digital to analog) to match the output board. (When DGX HD-15 RGBHV
Input Boards are used with DGX SC Optical Output Boards, the signals are converted to fiber and then
converted by a DGX RX; see “System Setup with DGX Modules” on page 47). For other types of
available boards, see the “Applicability Notice” on page 7.
Available Software
Board configuration software is provided to adjust the source signal for optimal display (see page 55).
EDID Programmer software is also included for re-programming the input boards if necessary
(see “Appendix A – EDID Programmer” on page 63). Both programs are available on the
AMX
AutoPatch CD and at www.amx.com .
FIG. 26
Epica DGX 144 HD-15 RGBHV input boards