AMX Epica DGX 144, Instruction Manual

Page: 11 / 107

Overview and General Specifications
7 Epica DGX 144 Instruction Manual
Overview and General Specifications
Applicability Notice
The information in this manual applies to the following Epica DGX 144 enclosure and Epica DGX 144
input and output boards:
Epica DGX 144 Enclosure (16 RU)
Epica DGX 144 Input and Output Boards
Each Epica DGX 144 system is custom built. The Epica DGX 144 boards that are currently available are
listed in the charts below. Each board fills one slot. All boards have 16 connectors except for the DVI
boards which each have 8 DVI-I and 4 DMS-59 connectors. The DMS-59 connectors break out to allow
two DVI connections each for a total of 16 input or output channels per DVI board.
A source connected to any of the input boards can be routed to any destination connected to any of the
output boards. When routing from one board type to another, the Epica DGX 144 automatically converts
the signal format to match the output board.
For general board information, see page 12 and page 36.
For specific board information, see the applicable board chapter, which is based on the
supported signal type.
DGX SC Fiber Boards* (see page 45)
DGX HD-15 RGBHV Board (see page 51)
DGX DVI Boards (see page 59)
* DGX SC Fiber boards are used in conjunction with DGX SC Fiber Transmitter and Receiver modules.
For system setup options with DGX SC Fiber boards and the modules, see page 20. For model numbers
of the compatible modules, see page 46. For system setup information, see page 47.
Configuration FG # Model
144x144 FG1055-11 AVS-EPDGX144-ENC
Type FG # Model
Input FG1055-440 AVS-EPDGX144-OI-SC
Output FG1055-450 AVS-EPDGX144-OO-SC
Type FG # Model
Input FG1055-480 AVS-EPDGX144-VI-HD15
Type FG # Model
Input FG1055-460 AVS-EPDGX144-VI-DVI
Output FG1055-470 AVS-EPDGX144-VO-DVI