Epica DGX 144 SC Fiber Boards
45
Epica DGX 144 Instruction Manual
Epica DGX 144 SC Fiber Boards
Applicability Notice
This chapter pertains to the following Epica DGX 144 SC
Fiber boards:
FG1055-440 Input board
FG1055-450 Output board
Epica DGX 144 enclosures can hold up to eighteen DGX SC
Fiber boards with 16 inputs or outputs per
board. Each board has 16 SC fiber connectors.
Each enclosure holds a maximum of nine input and nine output boards, accommodating connector
configurations up to a maximum of 144x144, as well as subsets (e.g., 128x64 and 80x112).
DGX SC Fiber input boards route signals to any type of Epica DGX 144 output board. DGX SC Fiber
output boards accept signals from any type of Epica DGX 144 input board. When routing signals
between different board types, the Epica DGX 144 automatically converts the signal format to match the
output board. For other types of available boards, see the “Applicability Notice” on page 7.
Important:
DGX SC Fiber boards must be used in conjunction with DGX SC Fiber modules (see the
compatibility list on page 46 and the system setup information on page 47).
FIG. 23
Epica DGX 144 SC Fiber boards
Summary of Contents for Epica DGX 144
