AMX Epica DGX 144, Instruction Manual

Page: 88 / 107

Appendix C – APDiagnostics
84 Epica DGX 144 Instruction Manual
Information Pane
The Information pane is the center panel in the Main Screen
and offers the next level of “drill down” into the system
status. Information pane buttons access information for each
of the specific group components listed. The type of
information displayed in the Information pane depends on
which tab is active in the Categories pane and which
Categories button is selected.
To display diagnostic information:
1. In the Categories pane, select the Diagnostic tab.
2.
Select either the Temperature or Power system buttons
as applicable.
3.
In the Information pane:
a. Click the Visual button to display visual details on
the enclosure in the System Visual pane.
For more information, see page 86.
b. Click the Plot button to display a Plot View with
a graph of data points for information being gathered
(Acquisition mode) or already gathered (Emulation
mode) for a specific component. The data is date
stamped as it is added to the graph.
For more information, see page 85.
c. Click the Details button to display a set of analog
status meters each representing current data for its
associated component. The meters provide an analog
representation of a component’s current value with
respect to its Warning and Error setpoints. If the value
is below its minimum or exceeds its maximum
Warning or Error setpoint, the color of the meter
changes from green (Good) to yellow (Warning) or
red (Error), making it easy to identify problem areas
at a glance.
a.
b.
c.