AMX Epica DGX 144, Instruction Manual

Page: 91 / 107

Appendix C – APDiagnostics
87 Epica DGX 144 Instruction Manual
Note: A yellow or red outline around a data line indicates that the component was previously in
a Warning or Error state.
To view information in the Event Status Notebook:
1.
Click the applicable tab:
All Events – comprehensive and sequential listing of all Notices, Warnings, and Errors
Notices (green checkmark) – data list collected indicating a status of “Good”
Warnings (yellow !) – data list collected that indicates the Warning set point (high or low) has
been exceeded
Errors (red !) – data list collected that indicates an Error state, i.e., has surpassed or exceeded
its allowable maximum or minimum set point
Data lines display for every component that is queried and provide:
“Green checkmark” (Notice) or “yellow !” (Warning) or “red !” (Error)
Component description (e.g., Center board 2, POL 1 power)
General status description (e.g., GOOD, has surpassed . . ., etc.)
Date/time-stamp for the event (e.g., 8/03/07 5:15:50 PM)
Amount of elapsed time that the component has been in that state (e.g., 7m:25s)
To access a data line context menu:
1.
Select and then right-click a data line in a list. The context menu options are:
Show Graph – opens a Plot View of the data points for that component
Date/time-stamp(s)* (information only; not selectable) – indicates the most recent time that
the component was in that respective state
Reset Selected Item*
Reset All Items
* These menu items only appear when a data line is outlined in yellow or red.
Tabs
Data Lines