ES-505
1-80
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
11.1.2. Press the button
to activate the stepping function. Then press the button
, bedplate movement.
Double press of the button
brings you back to the main menu, where you can check the display and its
correct setup. Illuminated icon
in the top left hand corner confirms, that te service mode is on.
11.1.3. Press the button
to come back to the service menu screen.
11.1.4. Depress the left and right foot pedal to make the bedplate move forward.
11.1.5. Instead of fabric, clamp in the machine a piece of paper – see chapter C 4.
11.1.6. Press the button
and turn the hand wheel. When the needle reaches upper dead point, it pricks into
the paper. Repeat these two steps until you make with the needle a full shape.
ATTENTION! you must not finish
the whole buttonhole.
11.1.7. Double press of the button
brings you back to the main screen. Press the button
. If this icon
, is illuminated, the bedplate comes back to the home position. In case there is an error message in the top
left hand corner, i.e.
, turn the hand wheel until you see
. Then press the button
. To bring
the machine back into the home position.
11.1.8. Press the button activation of immediate cutting
placed on the control box and cut the paper.