
ES-505
1-67
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
2
Model AF – automatic upper thread trimming
15
Model CT 10 - 22 – model with automatic trimming of all threads, short tail of all threads for buttonholes in the
range 10 mm – 22 mm
3
Model CT 14 - 26 – model with automatic trimming of all threads, short tail of all threads for buttonholes in the
range 14 mm – 26 mm
4
Model CT 22-35 – model with automatic trimming of all threads, short tail of all threads for buttonholes in the range
22 mm – 35 mm
5
Model LTT – model trimming all threads, long tail of all threads
6
Thread catcher on/off
7
Model RDE – roun buttonhole
Setting up models
15
(CT 10-22),
3
(CT 14-26),
4
(CT 22-35) it is possible to change these parameters:
8
Length of trimmed tails (range 3– 50 mm)
9
Time from clamp feet lift-up to thread trimming (range 0-150 ms)
10
Time from trimming to clamp feet lowering (range 0 -100 ms)
Setting up LTT model
5
- it is possible to change these parameters:
11
Adjustment of R axis in the moment of thread trimming (range ± 5 degrees)
12
Time between clamp feet lift-up and tread trimming (range 0 – 100ms)
13
Number of stitches after those LTT opener is activated (0 - 3 stitches)
Setting up AF, RDE models
2
,
6
it is possible to change these parameters:
14
Adjustment of centre round buttonhole in Y axis (range ± 2 mm)