AMF ES-505, Parts And Service Manual, Page: 84 / 146

2 3 4 5 6 7
8
9
10
11 12 13 14
15
16
17
18
19
ES-505
1-70
Released: 01/2018
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
2.7. INPUT TESTING
Input testing screen enables to check functions of machine sensors, buttons, pedals, switches and motors. Press the
button
1
on the main service screen to enter the input testing screen, which belongs to protection level II and is
protected by a password – see chapter E 2.2.
2 BQ1 - Synchronization sensor
3 BQ2 - Basic position of X axis
4 BQ3 - Basic position of Y axis
5 BQ4 - Basic position of R axis
6 BQ7 - Cutting sensor
7 BQ8 - Basic position of servo drive – Upper position
8
U5 - Servo drive error
9 U1-3 - Stepper motor U1-U3 error
10 SA1 - Emergency stop
11
SA2 - Sensor detecting machine cover open
12 SB4 - Left pedal / Right hand - control switch
13 SB5 - Right pedal / Left hand - control switch
14 SB6 - Cutting button
15 SQ5 - Low air pressure
16 BQ13 - Optical sensor (at Ultraflex model only)
17 BQ5 - Home position of sliding cutting steel (at
Ultraflex model only)
18 BQ10 - Home position of indexer when sewing from
the left (at indexer model only)
19 BQ11 - Home position of indexer when sewing from
the right (at indexer model only)
2.8. OUTPUT TESTING
Output testing screen enables to check functions of all valves including relevant sensors. Press the button 1 on the
main service screen to enter the output testing screen, which belongs to protection level III and is protected by a
password – see chapter E 2.2.
2 J1 - Clamp feet
3
J2 - Stretching work piece
4 J3 - Top thread draw-off
5 J4 - Top thread draw-off
6
J5 - Bottom thread draw-off
7 J6 - Gimp draw-off
8
J7 - Bottom thread trimming
9 J8 - Top thread trimming
10 J10 - Thread catcher – vertical movement
11
J11 - Thread catcher – horizontal movement
12 J12 - Thread catcher – opening and closing clippers
13 J13 - Indexer clamp feet (at Indexer model only)
14 J15 - Cutting cylinder
15 J16 - Suction system
16 J14 - Half pressure switch (at Ultraflex model only)
17 J9 - Trim stopper (at LTT model only)