AMF ES-505, Parts And Service Manual, Page: 86 / 146

ES-505
1-72
Released: 01/2018
E-mail: service@amfreece.cz; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
E - STANDARD MACHINE ADJUSTMENT
3. REPEATED FABRIC CUT MODE
There is a button 1 , placed on the outside of the control box, that enables
to activate cutting independently of the program. It can be used together
with the left foot pedal pressed down in order to have the fabric clamped by
the clamping feet and check the cut.
Place the fabric under the feet, depress the left foot pedal, hold it in that
position and push the button 1 . The cutting lever cuts the fabric so many
times, how many times you push the button 1 . Release the foot pedal.
MACHINE TYPE SETTING RANGE
AF, CT, LTT 00 00 - 3F
INDEXER 5F 40 - 7F
INDEXER ANGLE 9F 80 - BF
ULTRAFLEX FF CO - FF
4. SETTING UP PLC ACCORDING TO MACHINE TYPE
When PLC in the machine is replaced, it is
necessary to set up the position of potentiometer
according to machine type. Moving potentiometer
changes the main screen according to the
machine type.
Use a cross-head screwdriver to set up the
position (see pict. A , pict. B = detail).
Setting up the position is done in the machine
control box on machine being switched on.
It is important to remember that this operation
can be done only by an authorized person!
A
B