ES-505
1-53
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
3.3. SETTING CYCLE MODE WITH ACTIVE OPTICAL SENSOR
Optical sensor is used to automates the sewing cycle during production of women and men’s jackets. The aim of the
device is to recognize the type of buttonhole that is to be sewn and make the work of the operator easier. Using the
optical sensor reduces errors during work process.
Number „0“ on this button
1
on the main screen stands for the cycle mode being off. The icon
2
shows the Ultraflex model and optical sensor being active.
To set cycle mode with active optical sensor follow the instructions:
Press the button
1
. The cycle mode screen comes up.
Press the button
3
. The numeric keyboard comes up.
Set the cycle program number on the numeric key board within no 1 - 47 - see
4
.
Press the button
5
to confirm the selected program number and go back to the cycle screen.
Press the button
6
. On the numeric keyboard select the buttonhole number
7
to be sewn (range 1 - 99).
Press the button
8
to confirm your selection and to go back to the cycle mode screen.
Press the button
9
to save your settings and to go back to the main screen.
First zero “0” signals the end of cycle program
10
.