ES-505
1-52
D - MACHINE CONTROLS
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
3.2. BUTTONHOLE PROGRAM SELECTION IN CYCLE MODE
It is possible to chose individual buttonhole programs under position 1-21
1
in one cycle program.
Note
:
Cycle program is able to work with pre-set buttonhole programs only. For detailed instructions on their programming
see chapters
D 2.1.
to
2.10
.
Procedure
:
Press the button
2
. Numeric keyboard comes up.
Select a required buttonhole program sewn at the position „1“. Selected buttonhole program number is seen in the
top part of the numeric keyboard
3
.
Press the button
4
to save settings and come back the previous screen.
Proceed the same way to select buttonhole programs at the subsequent positions, that are to be sewn one after
another in one cycle program. Save the pre-set cycle mode pressing the button
5
.
To delete all pre-set and saved buttonholes of a certain cycle program, press
7
.
First zero “0” signals the end of cycle program
6
.