ES-505
1-51
Released: 01/2018
E-mail: [email protected]; webside: amfreece.com
Phone: +420 582 309 146; Fax: +420 582 360 606
D - MACHINE CONTROLS
3. CYCLE MODE
Cycling is to be used for sewing different types and different number of buttonholes in one sewing cycle that repeats.
Cycle mode can save up to 47 different cycle programs. One cycling program can keep a combination of up to 21
different buttonhole programs.
3.1. SELECTION OF PROGRAM NUMBER IN STANDARD CYCLE MODE
Press the button
1
on the main screen. Cycle mode screen comes up.
Press the button
2
. Numeric keyboard comes up. Select a number of cycle program from 1 to 47. Selected cycle
program number
4
comes up in the top part of the screen. Confirm your choice with the button
3
. It also brings you
back to the previous screen. Even here the
4
symbol shows the number of the cycle program as on the main screen.
Press the button
to move back to the main screen.
If number 0 is selected, cycle mode is switch off.
The number of buttonhole being sewn is marked with
5
.
This button
6
is used to shift individual positions of buttonhole programs within the cycle mode.
Use this button
whenever you need to move back to the main screen.
Note
:
On/Off cycle mode is indicated on the right part of the main screen: